Show:
safety
Painting and Refinishing
Technician Questions
Multiple Choice
100
___ should be worn when handling fluids that could burn your eyes.
Goggles
100
___ occurs when the aluminum flakes in a metallic color are not uniformly.
mottling
100
Tech A says that cotton clothing is perhaps the greatest source of contamination and should never be worn in a spray booth. Tech B says that lint free pain suits, rubber form fitting gloves, a dirt free cover and the appropriate should never be worn inside the booth. Who is correct.
Both
100
A __ checks the operation of the spray gun on a piece of paper.

a. pattern test

b. viscosity test

c. fluid test 

d.spray pattern test

D. Spray pattern test
200
If you have long hair, what should be done before you start working in the shop?
pull it up
200
___ begins on the inside of panel.

a.internal roughness

b. internal peeling

c. internal orange peel

d.internal rust

internal rust
200
Tech A says that one possible causes of the spray pattern being top or bottom heavy is that the horn holes could be partially plugged. Tech B says that one possible cause could be that the atomizing pressure is too low. Who is correct?
Tech A
200
___  ensures full, even coverage without applying too much paint at once.

a.spray stroke 

b.spray overlap

c.viscosity 

d.high-transfer efficiency

B. Spray overlap
300
Loose clothing, unbuttoned shirts sleeves, and dangling jewelry is acceptable in the shop. True/false?
False
300
Proper ___ is essential for an invisible repair
feather-edging
300
Tech A says that a grinder should be used to remove paint from vehicles. Tech B says that the heat from grinding can warp the panel and thin the metal. Who is correct?
Tech B
300
___ chemically eat into the bare metal to improve paint adhesion and corrosion resistance while also priming the surface.

a.self-etch primers

b.sand blasting

c.siphon blasters

A. Self-etch primers
400
Do not use hand tools for any job other than that for which they were specifically designed. True or false?
True
400
Consistent spray gun ___ is just as important as maintaining proper distance.

a.pattern test

b.travel speed

c.stroking

travel speed
400
Tech A says that spider webbing involves the use of a simple masking pattern to produce a custom paint effect. Tech B says that lace painting involves the use of a masking pattern to produce a custom paint effect.. Who is correct?
Neither
400
Some aftermarket panel or part suppliers protect new panels with a nonpaintable.

a.spot putty

b.e-coat

c.metal conditioner

d.shipping coat

B. e-coat
500
What is the number one rule in the class and in the shop?
NO  HORSE PLAYING 
500
Holding the spray gun too far from the surface causes a ____.
dry surface
500
Tech A says steel wool is an inexpensive, readily available tool that can be used to polish chrome. Tech B says that pieces of steel wool may become embedded in the new finish. Who is correct?
Tech B
500
__ uses hard silcia sand to abrade off the old paint.

a.final sanding

b.sand blasting

c.shipping coating

d.pressure blaster

sand blasting