FALL PROTECTION
ANCHORS
HARNESS & LANYARDS
HEIGHTS
DEFINITIONS
LADDERS
100
The 6 Foot Rule as it pertains to the construction industry
What is the height that fall protection is required in construction.
100
In the ABC's of Fall Protection, What does the letter "A" stand represent?
What is the Anchor Point.
100
Placed Mid-Chest
What is proper location that your chest buckle should be when your harness is on correctly.
100
18 to 19 feet
What is the fall clearance needed to stop if you were to fall without hitting the floor below.
100
Means of any condition on a walking-working surface that exposes an employee to a risk or harm from a fall on the same level or to a lower level.
What is a fall hazard
100
Name the types of ladders
What is step, multi purpose, extension, podium and job made.
200
What is Hazard Elimination, Passive Fall Protection, Fall Restraint Systems, Fall Arrest Systems and Administrative Controls
What is the Hierarchy of Controls in fall protection
200
Beam Clamp or "Beamer"
What is the type of anchor that can be used during construction of a steel structure.
200
Must be present and legible
What are inspection tags on fall protection gear.
200
42" +/- 3"
What is the height of the top-rail of a guard rail system.
200
Supported, Suspended and Aerial Lifts
What are the three types of scaffolds
200
Uneven surfaces, 4:1 ratio, extending 3 ' past the landing. What is another major hazard that needs to be identified before climbing a ladder?
What are electrical hazards
300
What do harnesses, lanyards, connectors have in common.
What are items that need to be inspected every time before use
300
5000lbs.
What is amount of weight that an anchor point must support.
300
Where is the proper location of the D-Ring.
The primary D-ring for fall arrest is located on the back, between the shoulder blades.
300
4"
How high does the toe-board need to be in a proper guard rail system.
300
2 inches in it least dimension
What is a gap or opening in a floor, roof or walking-working surface
300
Tying off at the top of a ladder
What is securing the ladder to prevent from falling.
400
1800LBS
What is maximum arresting force on a worker when an worker wears a harness.
400
The highest point above your head
What is the point in which the retractable is located when attached to an anchor device depending upon class.
400
Snug but not tight but not loose.
What is proper way to adjust your leg straps while wearing a harness.
400
What is the clearance beneath at toe board or kick?
What is 1/2 inch
400
4":12" or less ratio
What is a low slope (pitch) roof.
400
Using two of these, and one of those or two of those and one of these when climbing a ladder.
What is the 3-points of contact when climbing a ladder.
500
What is "The duty to have fall protection".
What is the responsibility of the employer to protect workers from falls at a specific height
500
Who makes sure your are properly tied off to an anchor point to stop you if you fall.
What is the responsibility of a coworker in assisting you in tying off before work begins and during the work process.
500
What happens to fall protection gear that has been subjected to a fall.
Remove the gear from service and contact your manager or Director of Safety.
500
10 Foot
What is the maximum height of a supported scaffold system before requiring fall protection.
500
One who by possession of a recognized degree, certificate, or professional standing.
What is a qualified person
500
Tagged out of service and properly disposed of
What to do if you find a damaged ladder.