Show:
FALL PROTECTION
ANCHORS
HARNESS & LANYARDS
HEIGHTS
VIOLATION
100
6 FEET
What is HEIGHT THAT FALL PROTECTION IS REQUIRED IN CONSTRUCTION
100

A secure point of attachment for equipment such as lifelines, lanyards, deceleration devices, and rope descent systems.

What is a anchor or anchorage point 

100
NIPPLE HEIGHT
What is PROPER LOCATION THAT YOUR BUCKLE SHOULD BE F YOUR HARNESS IS ON CORRECTLY
100
18 TO 19 FEET
HOW HIGH OFF THE FLOOR DO YOU HAVE TO TIE-OFF TO STOP IF YOU FALL WITHOUT HITTING THE FLOOR
100
YES, THE SIDES
IS IT A VIOLATION IF YOU ARE WORKING ON A SCAFFOLD THAT HAS GUARD RAILS ON THE FRONT AND BACK OF A SCAFFOLD, WHY
200
5 FT
What is HEIGHT THAT FALL PROTECTION IS REQURED IN GENERAL INDUSTRY
200
BEAM CLAMP
What is TYPE OF ANCHOR THAT SHOULD BE USED IN A STEEL STRUCTURE
200
NO COLOR DESIGNATION
What is PROPER COLOR FOR A HARNESS FOR A PIPE FITTER
200
42" +/- 3"
HOW HIGH DOES A HAND RAIL HAVE TO BE POSITIONED
200
TRAINING
What is ONE THE MOST SITED FALL PROTECTION VIOLATION THAT THIS TRAINING WILL SATISFY FOR US
300
2"
What is HOLE, SZE YOU NEED TO COVER
300
5000
What is AMOUNT OF WEIGHT THAT AN ANCHOR OR A RETRACTABLE LANYARD MUST SUPPORT
300
CENTER OF YOUR BACK BETWEEN YOUR SHOULDER BLADES
What is CORRECT THAT YOUR D-RING SHOULD BE IF YOU ARE WEARING YOUR HARNESS CORRECTLY
300
4"
HOW HIGH DOES A TOE-BOARD NEED TO BE
300
RETRAINING
What is THE MOST COMMON WAY TO MAKE SURE THAT AN EMPLOYEE WHO HAS BEEN TRAINED BUT CONTINUES TO INADEQUCIES (SCREW UP) FALL PROTECTION, GET'S IT
400
1800LBS
What is LIMITED ARRESTING FORCE WHEN A WORKER WEARS A HARNESS
400
THE HIGHTEST POINT ABOVE YOUR HEAD
What is HEIGHT REQUIREMENT FOR ATTACHING A ANCHOR DEVICE
400
SNUG BUT NOT TIGHT, BUT NOT LOOSE
What is PROPER WAY TO ADJUST YOUR LEG STRAPS WHILE WEARING YOUR HARNESS
400
15"
HOW HIGH DOES A TOE BOARD NEED TO BE IF YOU HAVE MATERIAL STACKED UP 11" NEXT TO THE OPENNNG.
400
REPLACE GUARD RAILS, CONTACT GC AND LET THEM KNOW YOU CAN'T WORK IN THESE CONDITONS. DON'T SAY START WORKING YOU WILL LOSE 100 POINTS
YOU ARE SETTING UP TO WORK AND THERE IS AN UNPROTECTED EDGE 4' TO YOUR LEFT, ANOTHER SUB LEFT THE GUARD RAILS DOWN, WHAT SHOULD YOU DO
500

Personal Fall Protection System 

What an employer uses to provide protection from falling or to safely arrest an employee's fall if one occurs.

500

MAKE SURE YOUR ARE TIED OFF CORRECTLY TO A PROPER ANCHOR POINT THAT COULD STOP YOU IF YOU FELL

What is THE RESPONSIBILITY OF YOUR COWORKER TO ASSIST YOU IN TYING OFF BEFORE YOU WORK

500
EVERYTIME YOU WEAR IT
HOW OFTEN SHOULD YOU INSPECT YOUR HARNESS
500

What is the maximum height you are permitted to work on a scaffold without fall protection.  

What is 10 feet

500

YES, EVEN THOUGHT IT'S NOT AN OSHA REQUIREMENT IT MAY BE A REQUIREMT OF THE MANUFACTURE OR YOUR COMPANY'S SAFETY PROGRAM

DO YOU HAVE TO TIE OFF IN A SCISSOR LIFT