Math
Name of Math Formula which gives a carpenter Total Length of all Sides.
Perimeter
Elevation at which a carpenter must tie off using Fall Protection.
6 Feet
When attaching a sill to the foundation which material Lumber should be used
(Double Jeopardy)
Pressure Treated
Actual size of 2x4 stud
3 1/2 " x 1 1/2"
How many Cubic Feet in One Cubic Yard
27 Cubic Ft in 1 Cubic Yard
An anchorage must be able to support how many Pounds for it to be an acceptable tie off point
(Double Jeopardy)
5,000 Pounds
A piece of #6 rebar has a diameter of:
3/4 Inch
Typical layout of Studs in residential Framing
16" O.C
Name the math Formula which would give a carpenter the square footage.
Area
Length x Width
What are two methods used to help prevent cave ins
Benching and shoring
What kind of concrete joint is formed when fresh concrete is placed over or against hardened concrete?
Cold Joint
Framing Member on which a Header rests On
(Double Jeopardy)
Trimmer
what is .75' in inches
(Double Jeopardy)
9"
What is the leading cause of death in Construction
Falls
In the building trades, the term frost line refers to the:
depth to which the soil freezes
Name of the type of hardware which anchors the bottom plate of a wall to the slab/ subtrate.
Anchor Bolts
Formula for Volume of a Cylinder
(Pi)R2 x Height
Name the Fatal Four in construction accidents
Falls
Struck by
Caught In and Caught Between
Electrocutions
The depth to which trenches must be dug, is usually found in what kind of view in the plans?
Section View
What would be the extra space needed for a single hung door with a 3/4" jamb according to the curriculum in your framing class.
2 1/2"
3/4"(jamb)+3/4"(jamb)+1/2"shim+1/2"shim
= 2 1/2"