ROOFING
What is the rib spacing on PBR panels?
What is the item code for PBR trim?
When a customer says they need a boot for their electrical, what do they need?
What is the average lifespan of a non-metal roof?
What should you do after you give a quote to a new customer?
What is the minimum pitch of a residential roof before butyl tape is required?
What length of time is required for our paint to dry on rigid frames and trusses?
How many square feet are in a roll of VRR3x6x100?
How often does a non-metal roof need repairs?
How thick is the skin of a rhino?
What is the rib height of a secure-seam panel?
How many 8” bolts are figured per gable truss?
Fill in the blank:
Underlayment should be folded over a minimum of _____ along the edges of the roof decking.
Fill in the blank:
Our roofing has a Class-___ fire-resistant rating, the highest possible.
A metal roof is (low? or high?) risk when considering lightening.
Do we cut our panels on an angle for the customer?
Do we install pole barns directly on top of existing concrete?
What is the R-value of 4” insulation?
Fill in the blank:
When installed and maintained properly, a metal roof can last _____________.
There are currently ____ Reed's Metals locations.
Why do we use galvalume, opposed to galvanized?
How many roll-up doors come standard in a galv-econ building?
What is used to fasten underlayment to the roof decking (not peel & stick)?
Fill in the blank:
When using a peel & stick underlayment, no nails are required on roof slopes up to __/12 pitch.
7/12. Over 7/12, nailing is required to prevent the underlayment from slipping when being walked on.
Fill in the blank:
Discussing your issues or complaints with a person who cannot help is considered ____________.