What is the name?
A nail in a 45 degree angle
Toe Nail
When I cut my studs for size, what type of cut I do?
Cross cut
used to hold up your form boards?
To use a power tool properly, the should always use
Wear eye protection
Wear ear protection
Understand the manufacturer's recommendations
DEWALT
Impact driver
Drill
A cut in an angle through the thickness of the wood
Bevel cut
When I cut a 2x across the middle of the grain, I am doing a ?
Rip cut / Ripping a board
The actual size of a #4 rebar
1/2 inch thick
The guard of an electrical saw should never be:
wedged open
Power Tool used to cut nail
Reciprocator saw / Sawzall
Name the plates on the wall?
Top double plate
Bottom plate
The three components of a door opening?
The blocks used to hold up rebar up from the ground
Cement Dobies
The jigsaw is used to primarly make
Curved cuts
What tool is used to make a plunge cut into plywood
Circular saw
Floor joist
The window sill should always be/have....
Two pieces of 2x / double up
Form boards
The Toe and The Heel
Size of the blade for a framing Circular Saw
7 1/4 inch
Vertical piece of the supports your ridge beam?
A post
The center wood used on the foundation to hold up your floor joist
Girder beam
Galvanized bolts that hold your plate to the ground
Hold down bolts with a washer and a nut
The size of a framing nail is.....
3 1/4 ---- 3 1/2 in in the book
It is used to remove a nail in the stud
Nail claw/ Cats claw