Repair Information
This is the most accurate search criteria when using a service information website.
What is a VIN?
This piece of safety equipment can help save your sight after contact with hazardous substances.
What is an eyewash station?
This is the unit of measurement for compressor air.
What is PSI?
This metal is used in the part of the frame marked with the letter D on your image.
What is Aluminum?
When disconnecting a 12-volt battery, you should remove this cable first.
What is the black, negative cable?
This is how often the emergency eyewash and shower station should be activated to flush out any sediment buildup on the supply line.
What is weekly?
These electric sanders are appropriate for use in removing coatings, creating featheredges, and removing defects.
What are random orbital sanders?
This metal is used in the part of the frame labeled A in your diagram.
What is Ultra-High-Strength Steel?
These statements will communicate the vehicle maker's point of view on what parts must be replaced of a vehicle is damaged.
What are position statements?
This section of the Safety Data Sheet will contain the date it was created or last revised.
What is Section 16 - Other Information?
This tool is used for removing decals, pinstripes, and adhesive residue.
What is an eraser wheel?
This metal is used in the frame area labeled C in your image.
What is Boron-Alloyed Steel?
These information labels are required to be affixed on both sun visors.
What are SRS information labels?
It is recommended to have this many spotters when moving a vehicle.
What is 2 spotters?
An owner or operator of a collision repair facility is required to keep accurate records for this long.
What is at least three years?
This metal is used in the frame area labeled B in your diagram.
What is Mild Steel?
When performing this process, you would use service information to identify parts, equipment, labor and procedures.
What is performing the blueprint process?
If hazardous waste is to be transported less than 200 miles, this is how many days it can be accumlated.
What is 180 days?
When sanding parts with an unusual shape, this type of abrasive backing is used.
What is foam?
This manufacturing process uses a high-pressure machine to press a sheet of metal into a die to bend or punch it into a shape?
What is stamping?