shop safety
miter saw
belt sander
band saw
scroll saw
100
the first thing you should grab when you walk in to the shop
safety glasses
100
TRUE OR FALSE: you should wear gloves when using the miter saw
FALSE!!!
100
what is number one
belt gaurd
100
FILL IN THE BLANK: The danger zone for the band saw is_______
to the right of the operator's position
100
TRUE OR FALSE: never put your fingers in line with the blade
true
200
the type of shoes you should wear when in the shop
closed toe
200
FILL IN THE BLANK: you should hold the saw in the ____ position until the blade stops
the DOWN position
200
what is number 5
abrasive disc
200
FILL IN THE BLANK :When sawing small stock, you should always use a ___________
use a push stick.
200
FILL IN THE BLANK: if you push to hard when making a cut with the scroll saw,if you apply too much pressure the blade will_______
the blade will break
300
if a injury happens what is the first thing you should do
notify the instructor
300
FILL IN THE BLANK: your fingers should be at least ___ inches away from the blade at all times
4 inches
300
what is number 6
the base
300
FILL IN THE BLANK :The blade on a band saw is a ________________ steel band with alternating teeth.
continuous
300
TRUE OR FALSE:Always leave the saw with the light off and the speed all the way down
TRUE
400
TRUE OR FALSE: if you wear eye glasses you DON'T have to wear safety glasses
FALSE!
400
What is the purpose of the "stop block" when making multiple cuts is ...
improve cut accuracy and consistency.
400
other than the sander its self what else should be turned on?
the dust collector
400
define the following: relief cuts
prevent the blade from binding
400
FILL IN THE BLANK:The correct blade tension is achieved when________
a ringing is heard when the blade is plucked
500
yellow color in the shop means...
caution
500
FILL THE BLANK: the table lock should be set at ___ degrees
90 degrees
500
TRUE OR FALSE: you are NOT aloud to lift the belt gaurd
you are when you are sanding a rounded area
500
FILL IN THE BLANK: Avoid ____________ of a cut.
Backing out
500
FILL IN THE BLANK:If the blade breaks you should _____
Notify the instructor