Equipment
The only person allowed to operate a forktruck.
What is a trained operator?
The height at which OmniSource requires fall protection
What is 4 ft
The only spot where a hotwork permit is not required?
A designated hotwork area.
The confined space in the front of the yard
What is the scale.
A device that utilizes a positive means to hold energy isolating devices in a safe position and prevents the energizing of a machine.
What is a lock?
The exact point on which an entire load will balance.
What is center of gravity?
when does OmniSource require user to inspect their Fall protection gear.
Before every use, or monthly
Stays for 30 minutes after Hot Works has ceased.
what is the fire watch.
The definition of a confined space.
What is limited means of egress, able to be bodily entered and not designed for continuous occupancy
A prominent warning device indicating "Do Not Operate" or other clear statement of danger.
What is a Tag?
The spot on the forklift where the capacity could be found.
What is the nameplate?
the weight that tie off point must be rated for
What is 5000 lbs
The distance at which combustibles should move away from area of where hotworks is being performed.
What is 35 Feet.
This is how long the area should be monitored during a confined space entry.
What is continuous
These are present near the machine to be locked out with instructions how to do it.
What is a Lock Out Procedure.
A forktruck or other powered equipment is considered unattended when an operator is this.
What is 25 feet away or out of view of equipment?
This must be done before an employee is allowed to use fall protection
What is fall protection Training
The of Fire extinguisher used for flammable liquids
What is a type ABC or Type B fire extinguisher?
It's what some confined space entries can be converted to.
What is Lock Out/Tag Out.
In a multi-lock out system what device is used to control lock out keys.
What is a lock box?
If the center of gravity moves outside of this, you're in trouble.
What is the stability triangle?
This should be considered when calculating a tie off point
What is Free fall distance
The temperature that a chemical will create ignitable vapors
What is flash point
these are the 3 key personnel that are required to perform a confine space entry
Who is the attendant, the entrant and confined space supervisor
The last step in a lock out procedure before starting repair work.
What is Try Out?