Properties of Shapes
Constraints
Determine Density
Properties of Solids
Physical Property Analysis
100
The number of square units required to cover a surface.
What is AREA?
100
Controls the size of a part.
What is DIMENSION?
100
The amount of three-dimensional space occupied by an object or enclosed within a container.
What is VOLUME?
100
The extent or measurement of a surface. Represents enclosed two-dimensional space.
What is AREA?
100
g/cm3 is an example of this.
What is DENSITY?
200
An imaginary line through a body, about which it rotates.
What is an AXIS?
200
Causes selected linear geometry to never intersect.
What is PARALLEL?
200
The amount per unit size.
What is DENSITY?
200
The two-dimensional contour that characterizes an object or area.
What is SHAPE?
200
The squared dimensions of the exterior surface
What is SURFACE AREA?
300
This is an example of this circle.
What is a CIRCUMSCRIBED CIRCLE?
300
A straight line or plane that touches a curve or curved surface at a point but does not intersect it at that point.
What is a TANGENT LINE/PLANE?
300
U.S. Customary is 32.2 ft/s^2 & SI is 9.81 m/s^2.
What is ACCELERATION OF GRAVITY?
300
The sum of the areas of all the faces of a solid figure.
What is SURFACE AREA?
300
If mass of high density polyethylene is 0.300 lbm. Then how many parts can be made from 152 pounds of high- density polyethylene?
506 full parts (506.667)
400
Slug, mg, g, kg, and lb.
What are examples of MASS and WEIGHT?
400
Causes lines, ellipse axes, or pairs of points to lie parallel to the X axis of the coordinate system.
What is HORIZONTAL?
400
The measure of the amount of matter that an object has or the quantity of inertia of the object.
What is MASS?
400
An angle less than 90 degrees.
What is an ACUTE ANGLE?
400
If the volume of an object is 2.031 in3 and the mass density is 0.306 lbm/in3. What is the mass of the object?
0.621 lbm
500
A shape generated by a point moving in a plane so that the sum of its distances from two other points (the foci) is constant and equal to the major axis
What is an ELLIPSE?
500
Causes selected linear geometry to lie at right angles to each other.
What is PERPENDICULAR?
500
The force caused by the acceleration of gravity acting on the mass of an object.
What is WEIGHT?
500
= 2πrh + 2πr2
What is SURFACE AREA of a SPHERE?
500
Is a solid object has a surface area of 10.25 in2 and one quart of cleaning solution will clean 14,400 in.2, how many quarts will be required to clean 3000 parts?
3.0 qts (2.135 qt)