Emergency Response
The meeting points to gather in case of an evacuation.
Rally point
Primary - Scale House
Secondary - Main Sign when entering driveway
What does LOTO stand for?
Lockout Tagout
What does SDS stand for?
Safety Data Sheet
Equipment that individuals use as a last line of defense to hazards and for their personal safety.
What is PPE?
What does JSA stand for?
Job Safety Analysis
What is allowed to be stacked in front of a fire extinguisher or emergency exit?
NOTHING
TRUE or FALSE
If an employee is not authorized, the employee may still lockout equipment if an authorized employee has already locked out the equipment?
FALSE
Give at least one sample of a Hazardous Chemical.
MDI, Paint, Thinners, Solvent, Rugby, Linoleum Plastics, glue, adhesives, varnish, bleaches
What is the standard PPE at the Wahpeton Facility?
Safety Toed Shoes, Safety Glasses, High Vis, Gloves
Who is most responsible for your safety?
Yourself!
How will facility personnel be notified in case of an evacuation or tornado?
Supervisor is responsible to notify all facility personnel via intercom system and radios.
The reasons it is important to verify equipment isolation by attempting to start the equipment.
1. Prove the equipment is isolated from energy
-Ensures that the disconnect is not damaged
-Ensures that the correct disconnects were used
2. Dissipate residual energy
Give at least one sample of Biological Hazard.
Bacteria, Fungi, Virus, Parasites
The word that is identified by the second "P" in PPE
Protective
Workers injured in falls from this object are usually less than 10 feet above the ground.
What is a ladder?
When using a fire extinguisher, remember the acronym PASS. What does the letter "P" in the acronym PASS stand for?
P: Pull the pin
A: Aim!
S: Squeeze the handle
S: Sweep back and forth
What are the 3 things workers must complete to stay LOTO Authorized?
1. Complete the LOTO Safety Training
2. Pass a written exam
3. Complete an Audit of Proficiency
How long should you flush your eyes in a contamination event.
15 minutes
How often do you need to change your PPE?
Whenever soiled or damaged.
What is the main thing you can do to break the chain of infection?
Wash Hands
What type of fire would you use a class B Fire Extinguisher on?
Flammable Liquids
What are the basic steps to locking out a piece of equipment?
1. Prepare for shutdown and notify affected personnel.
2. Shutdown the equipment.
3. Lockout the energy sources.
4. Verify equipment isolation.
-Begin to work on the equipment.
-When finished, ensure all tools are removed, guards are back in place and the equipment is ready to be started.
-Double check the area then start the equipment.
What is the employee's responsibility when dealing with chemicals?
Read labels and warning, follow job instructions, and participate in training.
Type of PPE that is worn on the face to protect the eyes from liquid splashed
What are goggles/ Face Shield
OSHA Stands for?
Occupational Safety and Health Administration