Devon
Which of the following statements is true for a National Occupational Analysis (NOA)?
The NOA is developed by HRSDC staff from their perceptions of the trade.
The NOA forms the basis for the Alberta Apprenticeship training program.
The NOA is developed by staff from the host jurisdiction.
The NOA is the sole document used to develop a Red Seal exam.
The NOA is the sole document used to develop a Red Seal exam.
Which co-ordinate system is the most common?
A) cartesian
B) polar
C) Pythagorean
D) Spherical
A) cartesian
Which system involves creating computer models defined by geometrical parameters?
A) CAD
B) CAM
C) CNC
D) DNC
A) CAD
When the largest and smallest size of a part are shown on a print, these sizes are called:
A) limits of size
B) allowance
C) fit
D) a good design
A) limits of size
The first source of CAD resulted from attempts to:
A) automate the drafting process.
B) automate the machining process.
C) automate the CNC process.
D) automate the simulation process.
A) automate the drafting process.
Developments in CAD were pioneered by:
A) Ford Motor Company Research Laboratories
B) Chrysler Research Laboratories
C) NASA Research Laboratories
D) General Motors Research Laboratories
D) General Motors Research Laboratories
Which of the following statements accurately reflects the steps required to produce a Red Seal exam?
The host jurisdiction holds a workshop to develop the Red Seal exam plan, the NOA is developed from the exam plan and then industry practitioners develop questions for the exam.
HRSDC convenes a workshop of industry practitioners to develop an NOA, the host jurisdiction collects and reviews all comments related to the draft NOA, and then HRSDC publishes the completed NOA.
HRSDC convenes a workshop of industry practitioners to develop an NOA, HRSDC collects and reviews all comments related to the draft NOA, and then the HRSDC develops an exam plan.
The host jurisdiction holds a workshop to develop the Red Seal exam plan, industry practitioners develop questions for the exam and then the NOA is developed from the exam plan.
HRSDC convenes a workshop of industry practitioners to develop an NOA, HRSDC collects and reviews all comments related to the draft NOA, and then the HRSDC develops an exam plan.
If a box contains 60 bolts and costs $8.00 per box, then the cost of 350 bolts would be:
A) $24.00
B) $36.00
C) $48.00
D) $60.00
C) $48.00
Which system uses geometrical design data to control automated machinery?
A) CAD
B) CAM
C) CNC
D) DNC
B) CAM
The intentional difference in size of mating parts at their MMC is called:
A) limits of size
B) allowance
C) fit
D) a good design
B) allowance
A machine bolt:
A) is any fastener that has a hexagon or square head
B) is any fastener with a driving recess
C) is machined to a higher standard than other screws, including tighter tolerances and better finish appearance
D) is used to provide a clamping force to secure an object within the piece it is threaded
A) is any fastener that has a hexagon or square head
A machine screw:
A) is any fastener that has a hexagon or square head
B) is any fastener with a driving recess
C) is machined to a higher standard than other screws, including tighter tolerances and better finish appearance
D) is used to provide a clamping force to secure an object within the piece it is threaded
B) is any fastener with a driving recess
Which statement is true?
The NOA for a specific trade should be studied to prepare for a provincial apprenticeship exam in that trade.
In an NOA, a Task is bigger in scope than a Block.
Industry practitioners are people that own businesses in a trade.
Industry practitioners are people that work hands on in a trade.
Industry practitioners are people that work hands on in a trade.
The step-by-step sequence of all operations required to produce a workpiece is called:
A) job planning
B) machining sequence
C) routing
D) process planning
D) process planning
What was CAD originally referred to as?
A) computer aided drafting
B) computer aided design
C) computer assisted drafting
D) computer assisted design
A) computer aided drafting
How many parts or items make up a sub-assembly?
A) 1
B) 2
C) 3
D) 2 or more
D) 2 or more
A cap screw:
A) is any fastener that has a hexagon or square head
B) is any fastener with a driving recess
C) is machined to a higher standard than other screws, including tighter tolerances and better finish appearance
D) is used to provide a clamping force to secure an object within the piece it is threaded
C) is machined to a higher standard than other screws, including tighter tolerances and better finish appearance
A set screw:
A) is any fastener that has a hexagon or square head
B) is any fastener with a driving recess
C) is machined to a higher standard than other screws, including tighter tolerances and better finish appearance
D) is used to provide a clamping force to secure an object within the piece it is threaded
D) is used to provide a clamping force to secure an object within the piece it is threaded
What are the three types of questions used on Red Seal exams?
knowledge, calculation and critical thinking
recall, application and critical thinking
recall, calculation and critical thinking
knowledge, calculation and short answer
recall, application and critical thinking
A percentage added to the operating costs is called the:
A) selling price
B) profit margin
C) overhead
D) fixed cost
B) profit margin
Operating costs include:
A) direct and fixed costs
B) labour costs and GST
C) materials cost and GST
D) overhead and GST
A) direct and fixed costs
If a total quantity of 25 assembled products were required, which of the following would the bill of material show?
A) the number of parts to manufacture one assembled product
B) the number of parts to manufacture all 25 assembled parts
C) it would not indicate part quantity
D) the standard lot quantity
A) the number of parts to manufacture one assembled product
As a general rule the clearance between a key and a keyway or keyseat should not exceed:
A) 0.002" total
B) 0.0002" total
C) 0.002" per side
D) 0.0002" per side
A) 0.002" total
If the major diameter of a screw is 0.190 inch, and the pitch is 24, what is the designation of the screw?
A) 8-24
B) 6-24
C) 10-24
D) 12-24
C) 10-24
Why is it important to obtain a Red Seal endorsement?
It is required to become a certified journeyperson in Alberta.
The Red Seal is the industry-accepted standard for excellence in a trade.
A Red Seal endorsement is required to be able to work in another jurisdiction.
Employers will not hire Alberta journeymen without the endorsement.
The Red Seal is the industry-accepted standard for excellence in a trade.