Definitions
What is Hot Work?
Any operation involving open flames or the creation of excessive heat and/or sparks
Who fills out the hot work permit?
Hot Work Operator
The Hot Work Permit has ___ parts;
Part ___ must be displayed where hot work is performed.
2;2
What do we use for atmospheric reading when welding in an area with IPA?
PID / IPA gas monitor
What is a Hot Work Designated Area?
An approved area where hot work can be performed without a permit. They are constructed of noncombustible or fire-restrictive materials.
Who verifies a Fire Watch is assigned if needed?
Hot work permit issuer/supervisor
How many fire watches must we have when welding from an elevation surface and where should they be located?
2 or more
One above where the welding is taking place and one below
List 3 equipment one must-have when performing hot work?
Welding blanket or curtain
Fire extinguisher/Water
Gas meter
What is a Hot Work Permit required area?
Areas, where hot work operations are undertaken provided the area, is made fire-safe, a Hot Work Permit has been issued.
True or False:
It is the hot work permit issuer/supervisor's responsibility to take all necessary precautions to prevent fires.
False; It is the operator's responsibility. The hot work permit issuer/supervisor is to verify the all precautions have been taken.
How many feet from the work area must combustibles be moved if possible?
35 feet
Where are the welding blankets located?
Stores
What is a Classified Area?
An area that has high potential for fire and / or explosion or combustible hazards cannot be adequately controlled such as but not limited to: Stills, Milling and blending
Who needs to have an extinguisher readily available and ensure it is ready to use?
Fire Watch
Fire watch (continuous) to last for___ minutes after hot work has ceased followed by a ___ or ___ hour monitoring at regular tours and the closure of the hot work permit documentation.
30;
1 and 3
What steps should be taken when utilizing a fire extinguisher?
P-Pull
A-Aim
S-Squeeze
S-Sweep
What is Fire monitoring and Post-fire watch?
Fire monitoring is conducted after post-fire watch for 1 hour or 3 hours
Post-Fire watch is conducted 30minutes after hot work has stopped
Who is responsible for completing the second section of the required precautions on the hot work permit?
The worker
What areas on site are hot work designated?
Maintenance shop
Contractors yard