The four step process used to isolate equipment prior to removing guarding, working on or performing maintenance
What is Lock, Tag, Try and Verify?
100
Shall be used by employees and contractors when working at heights over 4 feet where guarded platforms, scaffolding, or other work surfaces are not provided.
What is fall protection/harness?
100
What is needed before equipment can be cleaned with compressed air.
What are the inspection and permit forms?
100
What are three of the five types of mobile equipment?
What are fork lifts, tractors, platform lifts, hand trucks, and other specialized industrial trucks?
100
Must be worn or utilized when employees must go on top of a rail car.
What is a harness/fall protection?
200
What is the attachment called that is necessary to use if multiple people are working on a piece of equipment?
What is a group lock box?
200
When three of your four limbs are in contact with the ladder at all times
What is the 3 points of contact?
200
A housekeeping inspection shall be performed how often?
What is daily if equipment is running and weekly if equipment is not running?
200
What are the three steps of formal instruction that a new employee should take prior to operating a mobile equipment?
What is formal instruction, practical training, and evaluation of performance?
200
These individuals must maintain communication with scoop operator and only give the operators the signal to move after the tracks are clear.
What is a switchmen/spotter?
300
While working on a piece of equipment with exposed moving parts where injury can occur requires you to do what?
What is LOTO?
300
Workers injured in falls from this object are usually less than 10 feet above the ground
What is a ladder?
300
When performing housekeeping inspections, inspectors shall look for what types of items?
What are leaks/piles/rodent control?
300
When is refresher training needed for each mobile equipment operator?
What is when the operator has been observed to operate the mobile equipment in an unsafe manner?
300
Must be worn during any rail car movement, loading/unloading, or where rail car movement potential exists.
What is a high visibility vest/apparel?
400
When locking out all pneumatic, electrical, and gravity, what are you doing?
What is locking out multiple energy sources?
400
This attached to substantial structures capable of supporting 5000lbs per person of a static load
What is an anchorage point/lanyard?
400
What is the max pressure for air wand used to blow down?
What is 30 psi?
400
What is the maximum speed to operate a hand truck?
What is never operate at a speed greater than a normal walk?
400
Must be locked to isolate the track when rail cars are being cleaned, loaded, or track maintenance or any other work is being performed in the loading area.
What is a derail?
500
If a piece of equipment is to be removed from service for an indefinite period of time, what kind of lock and tag should be placed on the starter or circuit breaker?
What is a "out-of-service" tag and a unique lock?
500
For new platform construction, it is recommended that these be a minimum of 42 inches in height above the walking-working surface.
What are hand rails/guard rails?
500
Spills inside facilities shall be cleaned up within how many hours when the facility is in operation?
What is 48 hours?
500
What is the indication that the propane tank is full?
What is when the spitter valve pulses?
500
Used to reduce climbing onto and off of rail cars, to adjust brakes, and stay out from between rail cars when opening the jaws of an uncoupled railcar.