lubrication
The section of an MSDS where you will find information about the stability of a chemical is the _____ section.
what is the stability and reactivity
You can use the formula A = 1/2bh to find the area of any ______.
what type of permit do you need before welding in an industrial facility
hot work permit
A VOM is used to measure ________. (3 things)
ohms, amps, and volts
what is my favorite hobby
hunting
An MSDS may provide technical information for _____ chemical hazard(s).
one
the formula for the diameter of a circle is _______.
D = 2 r
what are two of the most common used PPE in an industrial facility
safety glasses and ear plugs
to determine whether a drive shaft is properly aligned, you could use a _____
strobe light
what is my favorite place to eat in Columbus
Hucks
Employers who use hazardous materials are required to _____.
label hazardous materials containers
A triangle has sides adjacent to the right angle are 12 inches & 16 inches long. The length of third side is _________.
20
what are two things a forklift operator does at a crosswalk driving a forklift
when using a voltmeter that does not have autoranging ,_____.
always start with the highest voltage setting and work down
How many kids do I have
2
The most common thickening agent used in grease is _____.
soap
a foot is 12 inches long; a cubic foot contains _____ cubic inches.
1728
what are the main 3 main types of maintenance when it comes to work orders
preventive , reactive, and predictive
a tachometer is used to measure _____.
rpms
where does my wife teach at
LCSD
Lubrication is the application of any substance that reduces _____.
friction
what is the gear ratio required to drive a compressor at 150 cylces/sec using a turbine that turns at 18,000 rpms
2:1
what does the red button in our shop do?
shuts off all power
the black test lead is applied to the _____.
negative terminal
why did i decide to teach
to inspire the next generation and teach them the joys of working with your hands in the trades