PSI
TRUE OR FALSE The static test is when the air pressure stabilizes, (about 5 seconds), start timing. Should not lose more than 2 PSI per minute. And the engine should be running.
FALSE Engine should be off.
How many components does the steering wheel have?
9
How do I do a service brake test?
Put Bus in drive, let it roll for about 5ft. and slam on brakes.
How many tires are on an MCI?
8 (BONUS if someone says 9 - for the spare)
When checking the cabin, what do you look for on the seats?
That they are not broken, damaged or loose.
At how many PSI does the low air warning come on?
Between 60 & 80 PSI
What is the only steering component that the drivers touch?
Steering Wheel
Brakes pads can have no less than ____" of thickness?
1/4"
True or False
The front tires cannot be re-grooved or retreaded.
True
As a driver what will you be checking on your seat belt?
That it's properly secured, mounted and adjusted. Should not be ripped or frayed. (not broken)
After the low air warning comes on and the bus keeps losing air pressure, the emergency brake should activate between ____ - ____ PSI?
40 - 50 PSI
Which are the steering components that are closer to the steering wheel?
The Spindle
If driver could see, what will they be checking the drums and rotors for _____, _____, and _____?
Cracks, dents or holes
True or False
The front rim can be welded as long as it's done by a professional.
False
When checking the pedals, what will you be checking for?
Rubber coating on them and no obstructed objects around or behind the pedals.
At how many PSI does the governor (compressor) cut out (stop filling the tanks)?
120 PSI
What steering component is the longest?
The steering arm
If the slack adjusters are set correctly, they should not have more than ____" of play.
1"
True or False
The tire depth thread in the rear is 4/32's
False
The correct tire depth thread in the rear is 2/32's
What as a driver will you be checking for on the fire extinguisher? (4 Responds)
1.) Secure 2.) Fully Charged 3.) Pin in place 4.) Seal around pin
At how many PSI does the governor (compressor) cut in (start filling the tanks)?
75-95 PSI
Name 5 of the 9 steering components?
1.) Steering Arm 2.) Steering wheel 3.) Steering Gear box 4.) Tie Rod 5.) Pit Arm 6.) Drag Link 7.) Spindle 8.) Steering ring knuckle 9.) Steering Shaft
If I put the bus in drive and don't release the emergency brake, what is the name of that particular test called?
Parking brake test.
What will be an indication that the rim/tire is loose?
Rust trail under the lug nuts or a shiny thread,
What are my 5 safety features?
1.) Triangles 2.) Fire Extinguisher 3.) Driver Seat Belt 4.) Extra Fuses 5.) Horn