6-inch Ruler
What are the two rulers on your 6-inch ruler?
1/32nds & 1/64ths
Keep long hair and loose clothing __________
secured.
Which primary flight control moves the airplane about the pitch?
Elevator
Which type of reciprocating engine has its cylinders arranged in a line?
Inline.
Which part converts the up-and-down motion of the piston into rotary motion?
Connecting Rod
On a 1/64” scale, the measurement of the mark immediately after 1/4 is ______________.
17/64ths
Before using any power tool, you should __________.
Inspect it for damage and proper setup
Ailerons are located on the __________.
Trailing edge of the wings.
Recips & GTEs
The part of the engine where combustion takes place is the:
Cylinder
What is the line immediateky after 63/64”?
1"
Which type of footwear is best for shop class safety?
Close toe thick sole shoes
The rudder controls which movement?
Yaw
This engine arranges its cylinders In a circle around the crankcase.
Radial
Which part ignites the fuel-air mixture inside the cylinder?
Spark Plug
Which is the smallest?
(A) 31/64” (B) 15/32” (C) 1/2” (D) 17/32”
B) 15/32”
If a spill of any liquid occurs in the shop class, you should first _________________.
Inform the instructor immediately
Which flight control is operated by the control wheel (yoke) being rotated left or right?
Ailerons
Which type of engine typically has two banks of cylinders set at an angle to each other?
V-Line
Which engine part moves up and down within the cylinder?
Piston
Measure the following line
Surprise!
Why should you never remove safety guards from machinery?
They prevent injury from moving parts
What is the main purpose of the primary flight controls?
Control aircraft movement about the three axes.
What type of GTE is on a helicopter?
Turboshaft
Which is the correct order of the four-stroke cycle?
Intake → Compression → Power → Exhaust