Section 1
Section 2
100

Before attempting to lift any material, _____. 

a. look for any protruding nails, wires, or sharp edges 

b. use a safety harness 

c. ask your supervisor for help 

d. ensure the stacking ratio is no greater than 3:1

a. look for any protruding nails, wires, or sharp edges

100

When moving a material cart on an inclined or declined surface, be sure the _____. 

a. load does not exceed the labeled weight capacity 

b. hand brake is within your reach 

c. hydraulic ram has been removed 

d. load is cushioned with moving pads to prevent slippage

a. load does not exceed the labeled weight capacity

200

What is the proper procedure to lift objects? 

a. Bend over with your knees straight, feet together, and then lift. 

b. Lift with your back, keep your legs straight, and keep your arms up. 

c. Lift with your legs, keep your back straight, and keep your head up.

d. Lift with your arms, keep your legs straight, and keep your head up.

c. Lift with your legs, keep your back straight, and keep your head up.

200

What device may have a rotating table surface and/or spikes on the table surface for a better grip? 

a. Roller skid

b. Pallet jack 

c. Pallet conveyor 

d. Accumulating conveyor

a. Roller skid

300

When stacking bags of material that are the same width, step back and cross key the bags _____. 

a. in each tier above seven feet 

b. until the stack reaches four feet 

c. every 10 bags high 

d. all the way to the top of the pile

c. every 10 bags high

300

To work with motorized material-handling equipment, a worker must be _____. 

a. trained, certified, and authorized

b. experienced and knowledgeable 

c. a job foreman or supervisor 

d. licensed to drive

a. trained, certified, and authorized

400

NEVER stack or store materials _____. 

a. in cabinets 

b. on scaffolds 

c. outdoors 

d. on pallets

b. on scaffolds

400

To prevent a tipover when driving a rough terrain forklift, keep the load _____. 

a. light 

b. low

c. high 

d. heavy

b. low

500

The knot shown in the figure provided is a _____. 

a. square knot 

b. clove hitch 

c. half hitch 

d. bowline 

b. clove hitch

500

The forklift hand signal for dog everything means _____. 

a. to lower the tines 

b. to tilt the mast back 

c. to creep forward 

d. to pause

d. to pause