Shop Safety
What should be worn in the shop at ALL times.
Safety Glasses
What does 70 in 7018 mean
70,000# tensile Strength.
what is the first thing you do when you get off the bus?
Come straight to class.
This tool is used to chip slag off of a weld.
Chipping hammer.
The top number of the fraction of the measurement you are taking is always what?
odd
How many forms of eye protection should be worn when welding or grinding?
2
What number tells what welding position a welding rod can be welded in. 7018
The 3rd number (1)
What is the 2 things you do when you first walk into class?
1.) Put your phone in the phone cabinet.
2.) Get dressed out
What is the hand tool you use to clean small debris off of your weld plate.
Wire Brush.
what are the 4 fractions we use on a tape measure
/2 , /4 , /8 , /16
1
what is slag?
The coating that covers the solidified weld metal. AKA the weld bead.
When do you start to clean up your welding booth?
10 min before the bell rings or when your instructor lets you know.
What tool is used to knock a tab off on your plate?
Hammer
How may 8ths are in a inch?
7 the 8th 8th is the begging of the next inch
Glove
What is the coating on the welding electrode (welding rod) called?
Flux
What do we do when we have a problem or need help understanding how to do something?
Example. You keep getting undercut on your welds but you can't figure out why?
Ask your instructor. That is what we are here for.
what tool requires 2 forms of eye protection and requires you to make a 100 on the test about it in order for you to use it?
Grinder
what 16th is before the half mark
7
what type of glove should you have on to carry a hot welding plate.
NO GLOVES should be used to hold/carry hot metal you should use locking C-clamps.
What does SMAW stand for?
Shielded Metal Arc Welding also known as stick welding.
What is Mr. Zachary's pet peeve?
EXCUSES and Giving up!!!!
what tool is used to move your arm up and down in the welding booth?
pliers or preferably a wrench
how many inches are in a foot?