Power and Drills
Before connecting any power tool to a power source, it is critical to
Confirm the power is set to OFF
The part of a drill that holds the drill bit in place is call the
Chuck
Never use a circular saw that does NOT have upper blade guard because the
exposed poses a danger
A power miter saw combines a miter box with a
Circular saw
An grinder type BEST suited to sharpening worn edges on cutting tools is the
Bench grinder
When using power tools, Never engage the
Trigger Lock
When using an appropriate bit, variable speed drills can be used like a
screwdriver
The most importance on a circular saw involves the
lower blade guard
Crosscutting with a table saw involves cutting the wood
to specific length
The adjustable tool rest on a bench grinder should be positioned
1/8 inch from the grinding wheel
Before replacing part such as bits, blades, or discs on any tools, it is important to
Disconnect the power source
A Porta-Power is an example of a
batter-powered tool
When using a circular saw, be sure to cut on the waste side of the cute mark to allow for the blade`s
Kerf
A low velocity fastening system used to drive steel pins or threaded studs into masonry and steel is a
power- actuated tools
When using a grinder, two of the most important pieces of PPE are
gloves and safety glasses
The blade on a portable band saw
run in one direction around guides
Pushing a board against a table saws blade before it reaches full speed
Can cause kickback and serious injury
Saw with fine blade that are excellent for delicate an intricate cutting are called
Jigsaws
Compared with powder-actuated mailers for the first time, it is important to
read the manufacturer`s manual
A type of grinder accessory that can be used to provide a stable surface for flexible sanding discs of buffing pads to rest against is called a
backing pad
Forstner Bit is
A bit designed for use in wood similar soft material.
Masonry bit is
A drill bit with a carbide tip designed to penetrate materials such as stone brick or concrete
The coarseness of a bandsaw`s blade is rated in
teeth per inch
Most craftworkers who use pneumatic mailers operate their compressors at
70 to 120 psi
A compact tool that operates by moving attachments back and forth at very high speeds is the
oscillating multi-tool