Terminology
General knowledge
Plotting
100

This is the number of cycles per second.

What is a Hz?

100

For a real-valued signal, we typically plot only this half of the Fourier spectrum because the other half contains redundant information.

What is the positive-frequency half of an autospectrum?

100

On a conventional frequency spectrum, moving to the right means you are examining these types of oscillations.

What are higher-frequencies?

200

If a wave has a frequency of 2 Hz, this is the time required to complete one cycle.

What is its period (0.5 s)?

200

Fourier decomposition represents a signal as a combination of these two types of trigonometric functions.

What are sines and cosines? 

200

This part of the spectrum

What is the noise floor?

300

This quantity, expressed in radians per second, describes how rapidly a signal oscillates in terms of angular displacement rather than cycles per second.

What is angular frequency ( \omega )?

300

You obtain this quantity by integrating the entire power spectral density (PSD) over frequency.

What is the variance?

300

If a PSD has units of m²/s, these are the units of the original signal.

What is meters?

400

This frequency represents the lowest frequency (nonzero) in a periodic signal and determines the frequency resolution in yourPSD

What is the fundamental frequency?

400

This feature of a time series contributes additional spectral energy at low frequencies and can be removed before spectral analysis to focus on fluctuations around the trend.

What is a mean and trend?

400

These are the typical axis scales used when plotting a power spectral density (PSD).

What are logarithmic scales (log-log)?

500

A signal is sampled at 10 Hz. This is the highest frequency that can theoretically be resolved without aliasing.

What is the Nyquist frequency (5 Hz)?