Show:
MATERIALS
MACHINES
ASSEMBLY
TOOLING
ADHESIVES
100
DULL KNIVES USED ON THE JOINTER OR PLANER WILL CREATE THIS
What is RAISED GRAIN AND TEAR OUT
100
THE WHEEL DIAMETER IS THE DECIDING FACTOR FOR THE SIZE OF THIS MACHINE
What is BANDSAW
100

MITRE JOINTS ARE NOT RECOMMENDED ON THIS COUNTERTOP MATERIAL

What is SOLID SURFACE

100
THIS ROUTER BIT IS BEST EQUIPPED TO RELIEVE WOOD DUST WHILE IT IS IN USE.
What is UPSPIRAL BIT
100
COMPLETELY WATERPROOF WITH A DARK PURPLISH GLUE LINE
What is RESORCINOL GLUE
200
7-8% MOISTURE CONTENT IS STANDARD FOR THIS PROVINCE
What is BC
200
MULTI RIP SAWS ALWAYS HAVE ONE AND MAY HAVE MULTIPLE SETS OF THESE
What is ANTI KICKBACK FINGERS
200
MEASURE CORNER TO CORNER TO CHECK FOR THIS
What is SQUARE
200
REGULAR FEED OR CONVENTIONAL CUTTING ARE ANOTHER TERM FOR THIS
What is UPMILLING
200
EITHER OF THESE GLUES WILL BOND OILY WOOD SURFACES WELL
What is CASEIN AND G2 EPOXY
300

4-9% MOISTURE FOR SOLID WOOD IN THIS PROVINCE

What is ALBERTA

300
LOCATED BETWEEN THE INFEED ROLLER AND THE CUTTERHEAD ON A PLANER
What is THE CHIP BREAKER
300

ASSEMBLING OF VENEERS INTO GEOMETRIC SHAPES

What is PARQUETRY

300
3 TEETH ARE IN CONTACT WITH THE MATERIAL AT ALL TIMES IS HOW YOU SELECT THE CORRECT BLADE FOR THIS TOOL
What is A JIGSAW
300
THIS GLUE PREFERS HIGHER THAN AVERAGE MOISTURE CONTENT AND GLUES DIFFERENT MATERIALS TOGETHER VERY WELL
What is POLYURETHANE OR GORILLA GLUE
400
INTERGROWN BRANCH OR A LIVE KNOT
What is A RED KNOT
400

THIS ALLOWS YOU TO PLANE ITEMS AT SLIGHTLY DIFFERENT THICKNESSES

What is A SECTIONAL INFEED ROLLER

400

6 PASSES ON THE TABLE SAW CREATES THIS JOINT

What is A LOCK MITRE

400
NATURAL AND SYNTHETIC MATERIALS MOST COMMON FOR SAND PAPER
WHAT IS GARNET AND ALUMINUM OXIDE
400
THESE GLUES ARE USED WHEN GLUING A WOOD INLAY INTO A SOLID SURFACE MATERIAL
What is EPOXY AND CYANOACRYLATE ( CRAZY GLUE )
500
DIFFORMED GROWTH ON TREE TRUNKS USUALLY CAUSED BY INJURY
What is BURL
500
35 DEGREES IS THE APPROXIMATE CUTTING ANGLE FOR THESE TWO MACHINES
What is THE JOINTER AND PLANER
500
THE USE OF SOLID WOOD BLOCKS TO CREATE A PICTURE
What is INTARSIA
500
J IS FOR LIGHT WEIGHT AND X IS FOR HEAVY WEIGHT ARE MOST COMMON RATINGS FOR THIS
What ARE BACKINGS ON ABRESIVE BELTS
500
THIS GLUE IS USED TO ADHERE VENEER ONTO CURVED SURFACES WHILE ON-SITE
What is CONTACT CEMENT