Most SANs use this protocol for communication between servers and disk drive devices.
What is SCSI?
100
This protocol is used to automatically discover, manage, and configure iSCSI devices on a TCP/IP network.
What is Internet Storage Name Service (iSNS) ?
100
The iSCSI Target Storage Provider component enables applications on a server connected to an iSCSI target to perform this on iSCSI virtual disks.
What is volume shadow copies of data?
100
A a_____ is a file-level data storage device that is connected to the server over a computer network to provide shared drives or folders usually using Server Message Block (SMB) or Network File System (NFS).
What is NAS?
100
Robust SANs usually have a higher level of this.
What is RAID?
200
iSCSI carries SCSI commands over these networks.
What is IP?
200
Use this Hyper-V disk management command to reduce the file size of a virtual hard disk.
What is Compact?
200
These allow for use of SSD and hard drive storage within the same pool.
What is Storage Tiers?
200
NAS Devices are typically accessed over the network using these.
What is SMB and NFS?
200
Servers use this to connect to the Fibre Channel storage device.
What is host bus adapter (HBA)?
300
You can install the iSCSI _____ role so that other Windows servers can provide iSCSI storage to other clients (including other Windows servers).
What is Target Server?
300
This is the name given to the new Windows Server 2012 R2 capability that allows an administrator to completely remove binaries from the disk for an unneeded role or feature.
What is Features on Demand?
300
This storage solution is capable of 10 gigabits per second or more.
What is Fibre Channel of Ethernet (FCoE) ?
300
When you configure an iSCSI target, you define which iSCSI initiators can connect to an iSCSI LUN by the client’s _____.
What is IQN?
300
Windows Server 2012 R2 provide iSCSI Initiators for these operating systems.
What is Windows and non-Windows operating systems?
400
This enables multiple TCP/IP connections from the initiator to the target for the same iSCSI session.
What is Multiple Connection Session (MCS)?
400
You would need to correctly use this cmdlet to remove the feature and its binaries from the disk.
What is Uninstall-WindowsFeature Bitlocker –Remove?
400
: After opening Computer Management, if the disk does not show up, right-click Disk Management and try to perform this.
What is Rescan disk?
400
Only Windows 8, Windows Server 2012, and Windows Server 2012 R2 support querying of the iSCSI Initiator computer for the iSCSI _____. For all other versions of Windows you will need to manually enter this value when configuring which iSCSI Initiators can connect to an iSCSI virtual disk.
What is Initiator ID?
400
You can use _____ to provide authentication between an iSCSI initiator and an iSCSI target.
What is CHAP?
500
This is a multipath solution that supports iSCSI, Fibre Channel, and serial attached storage (SAS) SAN connectivity by establishing multiple sessions or connections to the storage array.
What is Multipath (I/O)?
500
After you have removed the binaries for a feature from your Windows Server 2012 R2 computer, this status will be displayed for that feature if you run the dism /online /get-features command.
What is Disabled with Payload Removed?
500
This disk is given a maximum allowable size and will grow as needed until that maximum is reached.
What is dynamically expanding?
500
The two standards used in SANs include _____ and _____.
What is Fibre Channel and iSCSI?
500
For encryption of traffic between an iSCSi initiator and an iSCSI target, you can use _____.