P.P.E
This type of glove should be worn when stripping cable to protect against potential cuts and abrasions.
What are cut-resistant gloves?
Every Jobsite requires this person in order to perform work.
What is a "PMCow" or Person Managing Control of Work
This document is filled out every Monday morning.
What is Vehicle inspection.
This document should be filled out as an group prior to starting work each day and should be updated throughout the day as conditions change.
What is a JSA.
In what year was the last time the Cowboys won a Superbowl?
1996
What is the maximum duration for a Work Permit before revalidation is needed?
12 hours.
You can find policies and procedures in this area.
What is the Resource's
Who has the authority to use STOP WORK?
Everyone
This is the standard that defines the requirements for electrical PPE in the U.S.
What is NFPA 70E?
This is used to remind operators to check for overhead powerlines before operating equipment.
What is a "Look Up and Live" flag
According to multiple sources, this is the most dangerous aspect of working in the Permian Basin.
What is driving.
This material is commonly used in arc-rated clothing to protect against arc flash
What is flame-resistant fabric?
A _______ is an unplanned event that could have resulted in injury, damage, or loss, but did not because of chance, corrective action, or timely intervention.
Near Miss
This testing frequency is required for rubber insulating gloves and sleeves used in electrical work.
What is every 6 months?
This safety procedure should be completed just prior to starting work with significant risks and involves a walk-through at the task location.
What is a Start Work Check?