Car Wash
How many vented hatch cover is required to be on each hopper car and where?
4 - One for each compartment
What is supposed to be done operating shared switches?
Before a Conductor/Switchman operates any shared switch, they MUST have their crew break in via radio with the crew sharing the switch. The crew leader will then communicate to them that the shared switch will be lined against their movement
What must be checked and working before performing any work
Eye wash station
If a sample is more than 50 pounds what should be done.
Any railcar that requires a sample of 50lbs. or more will need to be moved and repotted.
5.4.1.1 These railcars will be moved to the outer tracks
When spotting the rack, where should we first be positioned?
On the east side stairwell.
When shoving a dead end track at what length should your safety stop be at?
A safety stop MUST be performed 2-car lengths prior to the clearance mark when shoving into a dead-end track. The train can then be shoved at walking speed (2-3 mph) to the desired clearance mark.
What does MDL stand for?
Master Document list
What is Misti last name spell it?
Jezek
Before asking the bottom tech to start the water pumps what must me done?
The water valves must be open!
How many no ride zone areas listed in the addendum?
16
What is the SPLC number for BMC BRC's
684779
What are the cafe hours lunch hours
10:45 - 12:35pm
How many red lights should be at the rack and when should they be on?
The should be two red lights on each side of the rack and they should be turned on during the drying set.
GSSP Rule 25.2.10 was updated to reflect?
25.2.10. A crewmember MUST watch the railcar(s) as the train pulls away to ensure there is no movement of the stationary car(s).
What does BRC stand for?
Billing Repair card
What form is used to change a procedure?
Procedure Validation form
If the red button on the MPU was pushed what is the cost of pushing that button?
$40,000
What is your method of operations?
6.28 Movement on other than main track
QAP 2.8 refers to what documents
Calibration records
What was the name of the last safety and training supervisor at the BMC for PSC Group.
Cody Dupuis