Show:
Yah
iznenadi nas
7.3 Lemurs
Leftovers
The Matt and Ryan Show
100
A push stick should be used when the width between the blade and the fence on a table saw is less than
What is 100mm/4"
100
How do you sharpen a Grinding wheel?
What is a wheel dresser.
100
Name the extension for the abbreviation "BLDG"
What is building
100
The Area of a Triangle
What is 1/2BH
100
Relationship in which an increase in one variable causes a decrease in another is said to be
What is indirect
200
This is the one part of stock that can't be jointed
What is the end grain
200
What kind of teeth does a ripsaw have?
What is chisel-shaped
200
Name 1 of the 3 extensions for the abbreviation "W"
What is water, washer, west
200
The soft conversion of mm to inches
What is 25mm
200
which weights more, a metric ton or an imperial ton
What is Metric
300
This determines the size of a jointer
What is the length of knives and cutterhead
300
What is the correct sanding sequence?
What is sanding from coarse to fine grit.
300
List the 4 line weights
What is Extra heavy, heavy, medium, thin
300
This is around the rim of the wheel in a band saw
What is a rubber rim
300
These four factors determine the mechanical advantage of a lever
What is M X MA = F x FA
400
The tool rest on a grinder should be positioned no further than ____ from the edge of the abrasive wheel
What is 3mm/1/8"
400
What router bit gives a concave edge?
What is cove.
400
Name the 2 extensions for the abbreviation "DR"
What is Dining room, door
400
Order of Operations
What is BEDMAS
400
The number of what determines the mechanical advantage of a pulley system
What is number of layers of cable accross the system with the one pointing up counting as one
500
This clearance is recommended between the stock being cut and the guide post on a band saw
What is 6mm/1/4"
500
Auger bits can be used for both a bit brace and a power drill. But they have once key difference.
What is the tang.
500
List the 4 line types
What is continuous, dashed, center, phantom
500
Formula for the volume of a cone
What is 1/3 x pi x r^2 x h
500
What must be done in order to add or subtract fractions
What is find a common denominator