Environment of Care
Requires 100% Completion
What is the required percent completion of high-risk equipment?
2012
What is the current NFPA-101 Life Safety Code the hospital is currently held accountable to?
75 Feet
What is the maximum travel distance to a Class A fire extinguisher?
ATS
What is used to connect the generator load to the building?
Annually
How often must med-gas systems be tested and certified?
One-year after installation
When are smoke dampers required to be tested after installation?
Suites
What is an area separated from the remainder of a building by walls or barriers and doors that limit the transfer of smoke?
5 Feet
What is the maximum height a 40 pound fire extinguisher can be mounted?
10 Seconds or less.
How fast is a generator required to provide emergency power to critical equipment in a hospital?
Approximately 300 Cubic Feet
How many cubic feet are in 12 E-Size Cylinders?
These are required to manage all of the risks associated with EOC.
What is a written plan?
Used when Life Safety Code Deficiencies cannot be corrected during construction.
What is an Interim Life Safety Measure (ILSM)
One and two-family dwellings
Where are fire extinguishers not required?
30% of Nameplate
What is the required load for a monthly generator test to avoid a load bank test annually?
DOT
What must all medical gas containers, cylinders, and tanks have stamped on them?
Color Coding is not allowed to..
What is NOT the primary method used to determine a cylinder or container contents?
Corridors 6 Feet wide or more
Where can an object 6 inches in depth, less than 36" wide and 4 feet apart be mounted?
Arrows, lights, signs
What are devises used to indicate where a fire extinguisher is located?
EGT
What is exhaust gas temperature?
WAGD
What is waste anesthetic gas disposal?
Not to exceed 100 Degrees Fahrenheit
What is the maximum temperature a sprinkler cabinet should be?
Shall not exceed 30 feet.
What is a dead-end corridor?
30 Feet
What is the maximum distance a Type-K Fire Extinguisher can be mounted from the hazard?
ASTM
What is the standard for fuel quality used in generators?
Category 1
What type of system in which failure is likely to cause major injury or death.