Not permitted
The Four Major Families of Lighting Sources
Incandescent (Halogen), Fluorescent, H.I.D., and L.E.D.
Small fittings like locknuts and bushings are ____.
Omitted From Box fill
This raceway provides the highest level of protection from physical damage (Severe)
RMC
More than ___ CCC reduces the ability to dissipate the heat
3
Openings around Electrical penetrations through ______ walls, partitions, floors, and ceilings shall be fire stopped using approved methods
Fire Resistance-Rated
Incandescent/ Halogen bulb Filament Material
What is Tungsten
Any Conductors that do not leave the box
Will not be counted (Box fill)
IMC is suitable for use in ___ atmospheric conditions
All
Maximum Allowable Percentage of Coss Section of Conduit or Tubing for 2 Conductors
31%
Overcurrent protection shall not exceed __ Amperes for 18 AWG Conductors
7 Amperes
F for Flame, G for Globe, H for _____.
Lantern Chimney
Boxes installed in Wet locations must be installed to _____.
Prevent moisture from entering or accumulating in Box or Conduit Body (Drain)
FMC is made up of a strip of metal that is ______ wound, formed, and interlocked
Helically
All Conductors of Same Size and Type Go To
Annex C
Where located 7 feet from the floor, cables shall be securely fastened in an approved manner at intervals not more than ____.
18"
Type IC
Insulation Contact
Trade Name for a "Christie Box"
Hand Hole Enclosure
HDPE is most likely used in ___________.
Underground/ Boring Applications
At maximum ampacity THHN type wire produces this amount of heat
90C or 194F
Carbon Monoxide alarms are not designed to detect _____, heat, or gas.
What is Smoke (All the Smoke)
Material that transforms ultraviolet radiation into visible light in fluorescent bulbs
Phosphor
A Short Radius Conduit Bodies must ________ a slice or tap
Not Contain
An auxiliary gutter must not extend more than ___ beyond the equipment it supplies
30'
Voids Between Strands of Wire
Interstices