CLI02-01-025
Definition
_________ is a term referring to the influence of the design on functional characteristic. For example, in a reinforced hose it would be the type of
reinforcement, pattern of reinforcement, core to cover ratio, and etc
Construction
A change using a chemical equivalent...It would it be considered a change
True
False
False
Definition
__________
All the operations establishing, within specified
conditions, the relation between the values of the quantity indicated by a measuring device or measuring system, or the values represented by a
material measure or by a reference material, and the corresponding values of the quantity produced by standard
Calibration
An external lab needs to be accredited to ISO/IEC 17025?
True
False
True
When in the project...the Identification of Measurement Equipment needs to happen?
At RP4
Definition:
________ ___________ Complex mixture of polymers, organic and inorganic fillers, plasticizers/oils,antiozonants, curatives, process aids, activators, coagents, etc. that is processed
into shapes. Mixture is vulcanized into permanent form using a variety of mechanisms (sulfur, peroxide, resin, etc)
Rubber Compound
Definition
__________
Facility allowing to perform controls, tests, and calibrations in the following area of activity but not limited to those ones: Chemistry, metallurgy, dimensional, physics, electricity, reliability
Laboratory
Definition
________ _____
parts used to verify the functioning or malfunctioning
of Poka-Yoke or integrated controls.
Challenge Parts
What are the inputs to define the control plan of the
characteristics to be measured?
Customer drawings,Specs,
FMEA. FVP, OAP.../Plan
client,Specifications,
AMDEC, FVP,OAP
Definition
_____ ____
Systematic reading error by a measuring instrument
Bias error
Definition:
______ _______
Process of making the rubber compound utilizing mill mixing or internal (Tangential, Intermesh, Tilt, and etc). Utilizes a combination of time, temperature, power, fill factor, chamber temperature, ram pressure, and order of addition. Can be done as a single stage or in multiple stages
Mixing Process
Definition:
_____
Determining one or several characteristics in conformity with a procedure
Test
Give at least 2 examples of environment conditions
- Temperature,
- Moisture level,
For any equipment... must be known with the label if the equipment is validated for use?
True
False
True
Definition:
__________
The ability of a measuring instrument to provide readings that are free of systematic errors
Accuracy
Complete the sentence
If no material approval exists, a material proposal, estimated timing,and _________ _____ are compiled and submitted to complete the RFQ
a) Chemist appointed
b) validation costs
c) similar costs
b) validation costs
Definition:
__________ _________
All the operations necessary to ensure that
an item of measuring equipment conforms to the requirements corresponding to its use
Metrological confirmatio
Who is the responsible of the sample collection?
a)The CMM technician
b) The Lab technician
c) The requester
c) The requester
Complete the sentence
The selection of the ITME is done during the Product Design / Process
Engineering by the _______ _____ and with the assistance of the laboratory or CMM and test departments
project team
Definition:
__________
Variation in measurements obtained with one measuring instrument when used several times by an appraiser while measuring the identical characteristic on the same part
Repeatability
Definition
Determination if material can be processed without excessive scrap or quality defects. Additional features can include formability, machine amps, “stickiness”, odor, and etc
Processability
Definition:
___________
Confirmation by tangible evidence that the
specified requirements have been satisfied
Verification
Who enters the PR in case of a sub contracted test?
Laboratory and Test / CMM Manager
AKWEL target is to select ITME whose minimum IT measurable is more than or equal to 8 x Ig but nevertheless accepts a value of 4 x Ig.
Where Ig means?
Overall uncertainty (Incertitude globale)
Definition:
____________
Variation in the average of the measurements made by different appraisers using the same gage when measuring a characteristic on one part
Reproducibililty