Special
Characteristics
Control
Characteristics
Control
The special characteristics need to be controlled along the...
a) Design, Industrialization and Delivery.
b) Design, Process and Product.
c) Design, Tooling and Parameters.
a) Design, Industrialization and Delivery.
It’s a description of the dimensional measurements,
material, and performance tests that occur after prototype and before
full production.
a) Pre-launch control plan
b) Prototype control plan
c) Production control plan
a) Pre-launch control plan
When the EPS detects a defect at 100 % and segregates the product from going further to the next step action on detection) it is named
____ __________ ________ _______
100% Automatic integrated control
What CLI´s are involved in the Control of SC? (3)
CLI01
CLI02
CLI03
Likewise, special characteristics must be transferred to our _________ through specifications, functional plans
suppliers
It is the German standard Quality Assurance in the process landscape...
VDA 4
Documentation of product/process characteristics, process controls, tests, and measurement systems that occur during mass production. It applies from the receiving (materials, components,..) to the delivery to the customer. It lists all the important
process parameters as well as important or special product characteristics.
Production Control plan
EPS is
Error Proofing System
Measurement and Improvement of SC are part of
a)CLI02
b)CLI01
c)CLI03
c)CLI03
What CLI02 instruction references the Special characteristics capability must be proven during the Product / Process validation
a) CLI02 01 019
b) CLI02 01 017
c) CLI02 01 032
a) CLI02 01 019
What is the CLI02 Operating Instruction for Process flow Chart and Control Plan
CLI02-01-017
Complete the sentence:
The ______ ____ is a reference document which commits AKWEL to its customer.
Control Plan
Complete...
The control of SC starts as early as the ______phases, together with the feasibility estimation and analysis required by the Customer.
a) Costing
b) Development
c) Design
a) Costing
The SC´s lists needs to specify:
a) SC, origin, value, control method
b) Plan, functional analysis
c) Validation plan
a) SC, origin, value, control method
Who is responsible for verification of «product » SC
conformity
Laboratory/Metrology
Classification of a product characteristic or manufacturing process parameter that can
affect safety or compliance with regulations, fit, function, performance,
requirements, or subsequent processing of product ...
Special characteristics
Part that is representative of a status validated by an
authorized body (customer or internal : Laboratory, Quality, Project).
b) First parts
c) Master sample
c) Master sample
All non conforming SC can have _______ _______ (reputation at stake, financial impact,... ). Project Teams must ensure these characteristics are treated with utmost rigor and attention to detail
a) Good impact
b) Significant repercussions
c) Significant congratulations
b) Significant repercussions
Mention 3 documents where the SC´s needs to be reported
Functional analysis
FMEA
Validation plan
Process flow chart
Control plan
Manufacturing / Control Instructions
Activities in the Deployment phase for SC´s:
a) analysis, goals, actions, new standards
b) regulations, feasibility, customer requirements
c) validation plan, drawings, product validation, components PPAP
c) validation plan, drawings, product validation, components PPAP
A description of the dimensional measurements, material, and performance tests that will occur during
building of the prototype ..is
a) Pre-launch control plan
b) Prototype control plan
c) Control plan
b) Prototype control plan
Define POKA YOKE:
When the EPS avoids the production of non conforming parts (action
on occurrence)
Any modification to SC will be considered a ______ modification according to the Operating Instructions CLI02 01 003.
major
It is not an AKWEL symbol for SC´s
a) Diamond
b) Triangle
c) Nut/hexagon
a) Diamond
Activities in the Priorization phase for SC´s:
a) analysis, goals, actions, new standards
b) regulations, feasibility, customer requirements
c) design and process FMEA
c) design and process FMEA