Basic Ladders
Regulations
Scenarios
Safety Smarts
100

This common ladder has flat steps and a hinged design, often used for indoor tasks.

What is a Step Ladder?

100

According to OSHA, this many points of contact must be maintained when climbing a ladder.

What is three?

100

You're about to climb a ladder and notice one of the rungs is cracked. You should ___

What is stop using the ladder and take it out of service?

100

Is it safe to stand on the top rung.

What is false?

200

This ladder can be extended to reach high places.

What is an Extension Ladder?

200

OSHA requires ladders to be inspected at this frequency.

What is before the first use of each work shift?

200

You need to carry material up a ladder. The safety way to get it to the top is ____

What is hoist the material up after climbing?

200

The highest safest standing level on a step ladder is ___

What is two steps down from the top?

300

When selecting a ladder for a particular job, look on the side rails to identify the ___ & be sure to not exceed it.

What is a Maximum Load Rating?

300

Ladders must not be placed in front of these unless they are locked, blocked or guarded.

What are doors?

300

You're working outside and the ladder is on soft, uneven ground. Before climbing, you should ____

What is stabilize the ladder & create a firm ladder base?

300

You can climb on a leaned step ladder.

What is no, they must be full opened and locked? Unless it is a lean-safe step ladder.

400

This type of ladder is made from non-conductive materials to reduce the risk of electrical shock.

What is a fiberglass ladder?

400

Cross bracings on the rear section of step ladders are meant to be used to climb.

What is false, unless it is designed & provided with steps for climbing?

400

You're 10 ft up in a ladder and need to reach just a little farther to the side. You should ____.

What is climb down and reposition the ladder?

400

Using a damaged ladder can ___

What is fail and cause serious injury?

500

Before setting up an extension ladder, you should ____

What is survey the area for a level surface, proper tie off point at top & potential hazards?

500

When using a extension ladder, the proper pitch is ____

What is 4 to 1 pitch?

500

You're using an extension ladder to access a roof. You should extend the ladder ____ above the roofline?

What is at least 3 feet?

500

When calculating weight so that you won't exceed the ladder rating, you need to consider ____

What is your body weight & the weight of the material you will be using?