Show:
+48v
FOH
Let's Go Skiing!
GPS
I HAVE THE POWER!
100
These D.I.s require +48v.
What is Active?
100
The 48 in console specifics "48 x 16 x 3".
What is Inputs.
100
This is the rolloff of frequencies in a crossover.
What is slope?
100
The number outputs from the crossover on a mono Bi-Amp system
What is Two.
100
the number of Breakers for one 5-wire cable.
What is 3?
200
These two parameters have to be on to send +48v to a condenser mic on the M7CL.
What are Master +48v and channel +48v.
200
the default setting for an AUX send on a Live Sound Console.
What is Post-Fader?
200
this is where two slopes meet.
What is cutoff point.
200
How you send all inputs to recording truck.
What is 3rd output from split.
200
This is always connected FIRST.
What is ground?
300
All shure mics over 80.
What is Condenser?
300
FOH Talkback to stage should be sent this way.
What is Pre-fader?
300
The range of the low-mid cut off freq. point on a FOH tri-amp system
What is 80Hz - 250Hz.
300
The reason to Insert the EQ in Monitors.
What is to hear it in the Cue wedge.
300
The voltage between ground and neutral.
What is 0v.
400
Meyer hall PA system is defined as this.
What is Self powered active Tri-Amp.
400
These two must be on to apply +48v to a mic on M7CL.
What is Master +48v and channel +48v.
400
this is a 2nd order slope.
What is -12db/oct rolloff.
400
This Split requires A/C.
What is Active?
400
the voltage between Red and White wires in 3-phase.
What is 120v?
500
Power in the USA is this.
What is 120v @ 60Hz.
500
When you can't hear an insert you may have forgotten this.
What is activate insert on channel.
500
Slopes most used in pro setups.
What is 3rd order or higher.
500
These are the options for +48v on an Active split.
What are locally or Feed 1?
500
the voltage between 2 HOTS.
What is 240v?