Equipment
The main traffic control device used by a flagger.
What is the Stop/Slow paddle?
Road Work Ahead, One Lane Ahead and Flagger Ahead?
What are the 3 basic warning signs used to tell motorist that road work is taking place.
FLAGGING PROCEDURE FOR STOPPING TRAFFIC
What is holding the flag steady in front of you
When relieved by a supervisor or certified flagger
WHAT IS, WHEN IS IT PERMISSIBLE FOR A FLAGGER TO LEAVE THEIR POST
Acronym MUTCD
What is Manual on Uniform Traffic Control Devices
The Slow/Stop Paddle should be at least 24" x 24" with 8" high letters. When using a paddle as a traffic control device, how high, at a minimum, must the paddle be mounted on the handle?
What is 5 feet
Warning signs are place at different intervals along a road or hwy, the interval is determined by the ____.
What is the Speed Limit?
FLAGGING PROCEDURE FOR SHIFTING TRAFFIC
What is holding the flag steady and motioning with your free hand in the direction you want them to go
When flagging near a hill, take a position in ____ of the hill. Make sure you are visible to approaching traffic.
What is in advance or before the hill?
A type of taper used in a flagging operation?
What is a one-Lane Two-way Traffic Taper
During nighttime flagging operations all flaggers should wear class___safety apparel.
What is Class 3 Safety Apparel?
The minimum recommended size for advance warning signs is 36"x 36"
What is Where speeds and volumes are moderately low
FLAGGING PROCEDURE FOR ALLOWING TRAFFIC TO PROCEED
What is dropping the flag to your side and motioning with your free hand
When flagging near curves, always make sure are visible to approaching traffic. Your flagging station should be well in _______if the curve.
What is well in advance of the curve?
Temporary Traffic Control section of the Manual on Uniform Traffic Control Devices (MUTCD) focus
What is The interaction between road users and the work zone
The typical size of a standard advance warning sign in work zones?
What is 48"x 48"
Advance warning sign that is optional in a flagging operation
What is: Be Prepared to Stop Sign
Turn the paddle a quarter–turn so that the word Stop faces you
What is to avoid confusing traffic behind you when you release the cars in front of you in a one-direction control flagging operations
The row of orange cones that starts at the flagger station and goes around the work zone
What is a tapper?
The acronym TTC
What is temporary traffic control
What type of barricade is used to mark hazards on expressways and other high- speed roadways?
What is type 2
Always ensure the proper placement and installation of advanced warning signs prior to beginning any flagging operation. At the end of the work day all temporary signs should be ________
What is removed?
THE COLOR, MAKE, MODEL AND LICENSE PLATE
WHAT IS THE INFORMATION THAT SHOULD BE TAKEN FROM A CAR THAT IS DRIVING RECKLESS OR SPEEDING IN A WORK ZONE ?
A pilot car is used
What is When the route through a work area is particularly long?
The primary function of temporary traffic control (TTC)?
What is to provide safe and efficient movement of road users through or around TTC zones while protecting road users, workers, responders to traffic incidents, and equipment.