Frank's Facts
What is the Title, Part, and Section number for the LOTO standard for General Industry
29 CFR 1910.147
What are the 3 options for machine safeguarding ?
Guards (Barriers), Devices, and Location (Distance)
The work rest on a bench grinder can be no more than _____ inch from the grinding wheel?
1/8th inch
Employers must report all P-O-O injuries from a press to OSHA within _____ days.
30
What must be displayed on the casing of a jack stand?
The load capacity
Where the work is done upon the stock i.e. cutting, boring, shaping ... is known as:
The Point of Operation
What are the 3 core components of a LOTO program?
Written Procedures, Periodic Inspections (Audits), and Employee Training
The tongue guard on a bench grinder can be no more than _____ inch from the grinding wheel?
1/4th inch
What test must be done on a grinding wheel before use?
Ring Test
Air tools require this accessory to prevent ejection of the attachments from the tool.
A Retainer
A device that uses a positive means such as a lock or a key or combination that will hold an energy isolating device in a safe position
A Lockout Device
What 3 groups of employees must be trained under the LOTO Standard?
Authorized, Affected, and Other employees
All fans and power transmission equipment must be guarded when operating less than ____ feet from the working surface.
7 feet
What color are the operators controls on a power press?
BLACK
Two hand trip systems on a full revolution clutch press require an _____________ feature.
Antirepeat feature
The person who attaches lockout/tagout devices and performs service and maintenance is known as:
The Authorized Person
What are the 3 requirements for using compressed air for cleaning?
30 psi, Chip Guarding, and PPE
The maximum opening on a fan blade guard can be no more than _____ inch.
1/2 inch
NFPA 70E requires refresher training for LOTO every ____ years.
Three years
Wood working machines require an ___________ device.
Antirestart device
The person who normally works with the equipment or in the work area but does NOT attach LOTO devices or perform service is known as:
The Affected Person
What are the 3 safety attachments for a hand-fed ripsaw?
Hood, Spreader, and Non-kickback dogs/fingers
What is the maximum angular exposure of wheel periphery permitted on a guard for a portable hand held grinder?
180 degrees
Power transmission apparatus shall be inspected every _____ days.
60
Power mower shut off devices shall require _______ and _______ reactivation.
Manual and Intentional