Human Equipment Interface
Material Handling / Lifting and Rigging
Working at Heights
Energy Isolation/LOTO
Cranes
100

What checklist does an operator have to fill out for their machine before they begin work for the day? 

Daily Visual Inspection 

100

What is the color of the tape used to inspect rigging this year? 

Yellow

100

If we are working at heights and require special PPE to prevent a fall....what permit do we need to have in place?

Fall protection permit 

100

Who is the LOTO Authority on the job? (STAFF Person)

What is Sinan Gungor 

100

If the crane is to be setup at a different location, what permit do you need prior to the shift in location?

Crane Move Permit 

200

Who is required to be named on the start card that is part of the HEI operation that day?

Spotters 

200

When rigging objects with sharp objects, what do we need to use to protect the rigging?

Softeners

200

When working at what height do you need fall protection?

6' or greater 

200

What is the purpose of a Lock out Tag out?

Recognize the hazard, de-energize the system, isolate/lockout the energy source, work on equipment safely 

200

Who is required to be named on the start card that is part of the crane operations for the day? (2 answers)

Qualified rigger and signalperson 

300

Who certifies the telehandler operator to use the machine in New York City? 

The union 

300

Who must be listed by name on the start card in the material handling safeguard?

Qualified / competent signalperson 

300

When working at heights, up to what weight can you tether an item to your body?

5lbs

300

What are the two instances in which you would remove your personal lock?


When your task is completed or shift is over 

300

What load chart should be used to determine the crane's capacity?

TSCD design load chart 

400

Name 3 safety devices that function on the telehandler on the job

Seatbelts, backup alarms, cameras

400

What do we need to do if we plan on removing rigging that directly supports or secures a load?

Write detailed start card outlining steps/procedure of removing the rigging

400

For a Fall Arrest anchor - how much force does the anchor point have to be able to withstand?

5000 lbs

400

If you place a lock on an isolation device and you lose your key and you have to remove the lock what should you do?

Inform your supervisor right away, do NOT cut 

400

What is the picking in the blind policy?

Use radios in any instance where operator cannot see, no daisy chaining hand signals

500

What is the HEI Planning Tool comprised of? 

HEI safeguard checklist, operation description, map of work area 

500

What are 3 of the 5 components of the Loading / Unloading SOP?

Adolfo flags

Spotter

Traffic / personnel protection

Strapping/unstrapping performed by driver

Step ladder to access trailer  

500

What is the rule of thumb for distance behind the work area your CAZ should be set up? 

10' plus an additional 1' foot for every 10' the person is elevated from the ground

500

Besides Electrical Energy, name 3 other forms of energy systems that require LOTO

Mechanical

Thermal

Pneumatic

Hydraulic

500

What are 3 of the 5 setup requirements listed on the crane setup safeguard?

Swing radius protection

Tires off the ground

Firm level ground

Correct cribbing/level

Within manufacturer's tolerances