MSDS
This is the frequency that one is allowed to look for information on an MSDS.
What is at any time?
Lubrication is needed to reduce this.
What is friction?
These are the three general types of plain bearings.
What are axial, radial, and guide?
This is the most common type of ball bearing.
What is a single deep groove radial bearing?
This type of ball bearing has rings parallel to each other instead of one inside the other.
What is a ball thrust bearing?
This section of an MSDS is where you will find information about the stability of a chemical.
What is the Stability and Reactivity section?
Grease is this type of lubricant.
What is a semisolid?
One disadvantage of plain bearings is higher friction, which causes this.
What is higher power consumption?
Sealed bearings serve these two purposes.
What are keeping foreign materials out and keeping lubricants in?
This roller bearing can carry the most force in the least amount of space.
What is a needle bearing?
The lowest temperature at which a material will ignite is in this section of the MSDS.
What is the Fire Fighting Measures section?
This is the most common thickening agent used in grease.
What is soap?
One advantage of babbitt metal in bearings is its ability to do this.
What is absorb and retain lubricant?
Spherical race ball bearings are also called this.
What are self-aligning bearings?
This type of roller bearing has rollers tapered on both ends.
What is a spherical roller bearing?
This section of an MSDS is where you will find the telephone number of the party who prepared the
MSDS.
What is the Chemical Product and Company Identification?
Extreme-pressure (EP) additives, also called film-strength additives, strengthen the oil used to
protect metal surfaces from this.
What are heavy loads?
Multiple groove bearings are commonly used when this is needed.
What is an increased oil supply?
Angular contact bearings are sometimes used back to back in pairs to handle this.
What are axial loads in both directions?
This type of thrust bearing must be run in an oil bath.
What is a flat plate thrust bearing?
An MSDS may provide technical information for this many chemical hazard(s).
What is one?
Boundary lubrication usually occurs during this phase of machinery operation.
What is start up?
Elliptical bearings are used in this situation.
What is high-speed, low-load?
Shallow groove ball bearings are designed to be used with these types of loads.
What are radial loads?
Tilting pad bearings are often used for this type of load.
What are heavy loads?