Planer
What does the planer do?
Reduces thickness
What does the jointer do?
smooths the edges of the board.
What type of cut does the table saw make?
A rip/with the grain.
What type of cut does the Miter Saw make?
against the grain.
Where should you stand when places wood through the in-feed table?
Off to the side.
When can you remove the guard from the blade?
Never!
What tool can you use to help cut the wood if the fence and the blade have a narrow gap?
push stick.
Where is your left hand when cutting?
behind your back.
What is the minimum length your board can be?
12”
If your board is shorter than the fence what should you use to help you?
push stick.
How high above the wood should your table saw blade sit?
1/4”
Do I want my longer side of my board to be on the left or right side of the blade?
Left.
How much wood can you remove per pass?
About 1/16”
what 2 parts of the jointer should you hold your wood against when using?
the fence and the table.
What is it called when the blade spits the wood back at you?
Kickback
True or False: The blade must stop spinning before you raise it from the wood?
True.
What should you do if your board is stuck in the machine, even after you’ve tried nudging it?
Turn it off, and adjust the depth on the in-feed table.
What is the margin of error for this machine?
4”
What is the minimum length of wood you should cut using the table saw?
12”
Which side of the line do I want to place my blade on?
The waste side.