Fire Protection
Hazard recognition
Protection
Wild Card
100

List all the 5 classifications of Fires

1. Class A

2. Class B

3. Class C

4. Class D

5. Class K

100

Recognize the hazard in this photo.


Too many cord connections and missing insulation.

100

What is an example of Administrative control for Noise?

Increase distance between the source and the worker

100

When is it acceptable to remove the guard from a grinder?

Never

200

What class fire extinguisher do we use/ put on all of our vehicles?

Class ABC

200

What hazards do you see here? 


1. Not the proper ladder 

2. ladder not set up properly 

3. Using the top as a step

200

Give an example of engineering controls for Temperature.

Heaters

AC or Air conditioning

ventilation

windshields 

200

How many feet over the landing should your ladder extend?

3 Feet

300

What does the Acronym P.A.S.S stand for?

Pull the pin

Aim at the base of the fire

Squeeze the handle

Sweep at the bases of the fire


300

What Hazards do you see here? 


1. Noise- jack hammering

2. Tripping- hose and prybar

3. No lower leg protection

4.  person standing in front of the jack hammer

300

What are the Mandatory PPE items here at Mahaney?

1. Gloves

2. Safety Glasses

3. Hard Hat

4. Knee pads

5. Stell/ Safety Toed boots

300

How do we know when we are using a full and complete Scaffold?

It' has a green inspection tag attached to it

400
What are the three elements of a fire?

1. Heat

2. Oxygen

3. Fuel source

400

What hazard do you see here? 


1 NO foot protection- Steel or safety toed footwear.

400

When is Fall Protection Required?

When an Employee is working at heights 6 feet or above.

400

What is OSHA's action level for noise?

85dBs

500

When should we inspect our fire extinguisher?

Daily before work begins.

500

List what hazards you see here? 


1. Foot ware

2. Glasses on top of head

3. Fall protection

500

What is Hierarchy of control?


500

What are the 5 key concepts to safe MEWP operation? 

MEWP is an aerial lift.

1. Avoid Hazardous situations 

2. Pre-Operation Inspection

3. Perform function checks

4. Conduct a work place inspection

5. Use it as it was intended