What is the minimum arc rating of PPE category 1?
4 cal/cm squared
What is the ratio an extension ladder should be setup at?
4:1
How far apart must a scaffolding platform plank be?
no more than 1"
What does NFPA stand for?
National Fire Protection Association.
Can krissy boy fit into a safety harness?
No, absolutely not!
What is the minimum arc rating of PPE category 2?
8 cal/cm squared
What is the weight rating for a type III ladder?
200lbs
What is the maximum deflection of a platform?
1/60
What kind of ladder should be used when working on an energized circuit?
Fiberglass or wood.
What is Krissy's favorite type of sweat pants!
Whichever one holds the gauze on best!
What is the minimum arc rating of PPE category 3?
25 cal/cm squared
What is the weight rating on a type IAA ladder?
375lbs
How wide does a platform need to be?
18"
What is the fall protection requirement you use with all scaffolding?
PFAS
How many times does Krissy crank his small little hog a day?
at least twice a day
What is the minimum arc rating of PPE category 4?
40 cal/cm squared
How many points of contact are needed at all times when working from a ladder?
3
What is the rated load capacity for a light duty scaffold?
25lbs per square foot
What PPE is needed when operating a lift?
Hard hat
Safety Glasses
Safety Harness
What is Krissy's nickname?
Kris "The Arc Flash" Byers
In the arc flash label, what is the second label requirement?
Arc flash boundary
If you are working from a fiberglass ladder, where the point of contact is 40' from the ground, how far must the legs be extended from the wall?
10'
What is the rated load capacity for a three person scaffold?
250lbs to the left right and center.
When inspecting a ladder, you should always follow the _________ recommendations?
Manufactures
What did Krissy need to lose to work at Taco Bell?
the short and curly's