Park Trailers
What is the minimum thickness allowed for plastic laminates?
.005 inches
NEC 552.5
NEC 552.1
What is the code for Termination(s) at Devices in Temporary Installations?
NEC 590.4(I)
What is the code for Time Constraints?
NEC 590.3
Scope
NEC 590.1
What table is used for low-voltage overcurrent protection?
Table 552.10(E)(1)
What code covers the marking requirements in low voltage systems?
What is the code for Furnace and Metal Air Duct Bonding in Trailer Parks?
NEC 552.57(F)
What is the code for Services?
NEC 590.4(A)
What is the code for Feeders?
NEC 590.4(B)
What are two areas exempt from receptacle spacing requirements?
Bath and hallway areas
NEC 552.41(A) Exception No. 1
Where shall the overcurrent device be installed?
In an accessible location within 18 inches of the point where the power supply connects to the unit circuits.
NEC 552.10(E)(4)
What is the code for Listing of Decorative Lighting?
NEC 590.5
What is the code for Receptacles in Wet Locations?
NEC 509.4(D)(2)
What is the code for Disconnecting Means?
NEC 590.4(E)
What code lists the requirements for pipe heating cable outlets?
NEC 552.41(D)
What shall switches in lighting circuits not be rated less than?
10 amperes
NEC 552.52(A)
What is the code for factory tests for low-voltage circuits in Trailer Parks?
NEC 552.60(B)
What is the code for Guarding?
NEC 590.7
What is the code for Assured Equipment Ground Conductor Program?
NEC 590.6(B)(2)
What code must small appliance circuits be in accordance with?
NEC 210.11(C)(1)
[NEC 552.46(B)(2)]
Definitions
NEC 552.2
What is the code for Protection from Accidental Damage?
NEC 590.4(H)
What is the code for Splices?
NEC 590.4(G)
What is the code for Receptacle Outlets with Ground-Fault Protection for Personnel?
NEC 590.6(A)