Show:
Scissor Lifts
Boom Lift
Hydraulic Systems
Electronics
Control Systems
100

These are the two types of drive motors in scissor lifts.

What are Electric and Hydraulic?

100

This type of boom has multiple boom sections that hinge allowing the operator to gain access to work areas over obstacles and barriers.

What is an Articulating or Z Boom?

100

The force that lowers a scissor lift.

What is gravity?

100

The usual color for a ground wire on a Genie.

What is Brown?

100
The main controller of this control system is located in the platform controls

What is ALC500?



200
This controls the battery voltage that is sent to the motor controller.

What is a contactor?


200

The number used by JLG that specifies a six month block of machine production to aid in getting service information

What is the PVC number?

200

This pump is the closest to the engine in the pump stack on a Genie boom.

What is the drive pump?

200

The expected resistance reading between CAN+ and CAN- in a functioning CAN network

 What is 60Ω?

200

This control system can be accessed via the display, an ethernet cable, or with the Techpro Link handheld

What is Smartlink?

300

These provide extra stability when lifting on some Scissor lift models 

What are outriggers?

300
This extra articulation at the end of the stick provides more positioning options and an additional 5-6 of lift height.

What is a Jib?

300

This is included in the hydraulic system of a scissor lift to keep the brakes released in the event of a pressure drop from descending an incline.

What is an accumulator?

300
This type of sensor provides a measurement of machine position in degrees on the X and Y axis.

What is a UTS?

300

This boom lift control system can be accessed via the display on the ground controls or with the Techpro Link handheld.

What is ALC600?

400

These reduce ground clearance when  the lift is elevated for increased stability

What are Pothole Protectors?


400

This area inside the turntable allows a boom lift to rotate without twisting the hydraulic hoses used for brakes, steering, and travel.

What is a rotary coupler?

400

This type of flow is used for the high speed setting on scissor lifts.

What is Series?


400

The highest percentage an FE boom will charge the battery system using only the engine and generator. 

What is 85%?

400
This control system uses redundant sensors for an extra measure of safety for operators of large booms. 

What is ALC1000?


500
The model number of a 19' Skyjack scissor that is 32" wide

What is 3219?

500

This device found on a boom senses changes in terrain on the non steer axel and adjusts the rear steering axel accordingly. 

What is an Oscillate valve?


500

This is used to control the flow to "low flow" functions on a boom lift using the Plus + one control system.

What is a proportional relief valve?

500

An marking on a wire that supplies voltage to a solenoid controlling retraction of a cylinder on a Genie boom lift

What is a black stripe?


500

The password to access service mode on an ALC600 boom.

What is 3-3-2-4?