VEXCode VR: Motion
Which VEXcode VR command is used to make the robot move the distance you want
The Drive for command is used to put the robot in movement or set a distance, it can measure in mm or inches. I can change the "forward" command to "reverse" to make it move backwards or foward. I can also change the command "turn right" to "turn left" so it could move in the right direction
.
Why is the Drivetrain command helpful in VEXcode VR?
The Drivetrain command helps the robot to move forward, backward, and turn correctly in the direction you want.
What will the Wait until command end in?
The Wait until command will end the rest of the coding because it will pause the whole thing
How many stacks can be connected to the Standoff in the map?
One stack can be connected to the standoff to score the points
How many points is only one Connected Pin worth?
Each connected pin is only worth 1 point.
How do you change the speed of the robot when it is driving
You can Set drive velocity command and it will let you set the speed of the robot when it drives or turns.
What happens to the drive velocity if you don't use a set a command, of the speed you want
The robot will be slow and stay at 50% of speed
Why does the drive for command work a lot?
It is helpful because it sets an exact distance to move the robot.
Do stacks have to be correctly standing to score the points?
It will have to be correctly standing or supported for the system to score the points
What is the bonus for each stack I make
Each stack might receive 10 bonus points or 20 points
.
How can you use the Distance Sensor for the Robot so it can stop before it crashes into anything
You would use a "Wait for" command to make it stop where you want it to be
Each square on the VEXcode VR is 200mm, How can I make the coding of the robot to move 4 squares up?
You can put drive foward for 800mm to move up 4 squares
Does a Drive for command runs or wait?
It waits until a percentage is put in then it runs until it pauses
Can you gain points if the stack is knocked over but in the right spot
What if I make a stack of different colors will i get points?
Yes you will get points of stacks with different colors, it doesn't matter
How are the sensors of the robots useful for turns and the directions
The sensors are useful in the robots since it makes better choices when programming it, and it is easier to code. And it is able to detect the direction and distance it is going.
How can I make the robot drive perfect on the map?
you can drive foward or turn 90 degress left or right without bumping into anything
What sensor can I use to detect the distance the robot is driving?
You can use the distance sensor.
Can a robot hold an amount of objects?
Sometimes the robot can't hold a lot of stuff depending on the robots structure
How does the Turn to heading command useful for your robot, and what value should you turn to head directly to the side
It is useful because it makes it easier to drive and give direct turns just with a number.nYou should put 90 degress to turn directly to the side.
Why might a robot turn be be good when using the drivetrain?
It will be good because you are coding right and the drivetrain command controls the robots movements a lot.
What is a robot brain used for in robotics logic?
A robots brain helps calabrate the robot to help move the motors and move the wheels
Can I use glue to hold together parts of my robot or tape?
Using tape or glue will not be affective because it will not function the robot correctly how it is supposed to work