The basic dimension on a detail drawing that indicates the distance from front to back.
What is DEPTH
100
This area is commonly found on a drawing sheet. What is it called.
What is TITLE BLOCK
100
What term best describes the list of items below?
-Must be made of 4 to 6 pieces
-Must be interlocking
-Part cannot extend more than 3 units in any direction
-no two parts can be the same
What is CONSTRAINTS
100
What is the first view placed or created in a three-view drawing or sketch?
What is FRONT
100
Generating a large quantity of ideas for a solution to a problem is called...
What is BRAINSTORMING
200
Never dimension to a...
What is HIDDEN LINE
200
The most common views used in a three-view, orthographic darwings are...
What is FRONT, TOP, RIGHT SIDE
200
The measuring tool in my hand is called a
What is dial CALIPER
200
What is the name of the item pictured. It is commonly found on a drawing sheet.
What is PARTS LIST
200
An improvment of an existing technological product, system, or method is refferd to as an...
What is INNOVATION
300
If a designer/engineer needs to calculate how many quarts of paint are needed to double coat 500 of on particular part in an assembly, what physical property would they need to know?
What is AREA
300
A ___________ skecth is a sketch with text added to enhance the communication of ideas/thoughts of the designer.
What is ANNOTATED
300
The first part brought into an assembly is known as the base compnent. The base component is....
What is GROUNDED
300
Many times, a small assembly is created and then brought into a larger assembly. The small assembly is called a _______?
What is SUBASSEMBLY
300
A _______ is a person who is trained in and uses technological and scientific knowledge to solve practical problems.
What is ENGINEER
400
d2*.5 is considered what type of constraint?
What is NUMERIC
400
A _______ is the most common method of communicating the shape and size of an objecy that is intended for manufacture
What is MULTI-VIEW PROJECTION
400
(drawing on board) this is a call out for what type of hole?
What is COUNTERSINK
400
A full-scale working model used to test a design concept is called a...
What is PROTOTYPE
400
If the dimensions on a part have the same precision as the dimensions below, which part would cost the most to machine?
-3.98
-4.102
-3.9
-4.00
What is 4.102
500
Extension line gap distance, percision, units, trailing zones, and terminator size are all options that can be set as part of the dimensioning _______?
What is STANDARDS/STYLES
500
Engineers Create ________ to quickly record, communicate and investigate ideas.
What is SKETCHES
500
How many degrees of freedom remain on an ungrounded part after a singel insert contraint has been applied?
What is ONE (1)
500
What type of document includes the following section headings?
-Client
-Problem Statement
-Design statement
-Contraints
-Deliverables
What is DESIGN BRIEF
500
(Drawing on board) What is the volume of this part?