MMI FSNA ISS Jeopardy Challenge #1

Where Do I Belong?

100

I’m a TracStar® 630 Series 2

Underground

200

I’m an Acrobat™ 250

Mechanical

300

I’m a Pit Bull® 26

Underground

400

I’m a Spider™ 125 Series 2

Mechanical

500

I'm a set of Pipe Rollers

Both

Under Pressure

100

This three-letter abbreviation is the common unit used when talking about hydraulic pressure

PSI

200

A customer asks for the pressure required to make a fusion. Before giving them a number, you need to know this important measurement of the pipe

Pipe Size & Diameter

300

A customer gives you their pipe size but wants to know the proper fusion pressure. What other pipe information do you need to determine the correct value?

DR or SDR

400

This pressure must be accounted for because it takes pressure just to move the carriage before fusion pressure is applied

Drag Pressure

500

A customer wants Inside Sales to tell them exactly what fusion pressure to use, but you don't have enough information or aren't confident in the calculation. What's the best move?

Refer them to the appropriate technical resource and/or don't guess.

Color Me Hydraulic

100

I'm a Green Cylinder, what force am I?

High Force

200

I'm a Yellow Cylinder, what force am I?

Low Force

300

I'm a Orange Cylinder, what force am I?

Medium Force

400

All Acrobats have what color Cylinder?

Gray, Silver or no color.

500

Two machines need to produce the same fusion force. Machine A has larger cylinders than Machine B. Which machine will require the lower hydraulic pressure to produce that force?

Machine A

Digital Underground (& Mechanical)

100

I store joint records

The Vault

200

I am the interface for all iSeries machines

DataLogger

300

I'm your Fusion Dating Profile

Operator ID

400

I cling to pipe for better traceability 

Vault ID Tags (Sticker doesn't not count!)

500

I'm smarter than you are and can tell you how to fix your machine

McElroy Intelligence 

Accessorize

100

There's no sagging when I'm holding the pipe

Pipe Stand

200

This roars into the gas market and keeps everything straight

LineTamer

300

A spicy, multi-use device used on live pressurized, plastic mains

Hot Tap Tool

400

Used directly on the jobsite, this manual tool performs a modern "bend back" test by putting a pipe coupon's full wall thickness into tension to check joint ductility

Guided Side Bend Tester

500

This will feed a Fusion Cowboy's machine all day long

Polyhorse