Module 1

Intro to Publications/NAMP

100

A term that indicates futurity

Will

200

..... has the final disposition authority on any changes to the NAMP.

COMNAVAIRFOR

300

Issued in a message for to expedite the dissemination of urgent operation and maintenance change information.

Interim Rapid Action Change (IRAC)

400

It indicates if the activity has the ability to repair an item, the level of repair capability, and the work center that performs the repair.

Individual Component Repair List (ICRL)

500

Definition: Publications and other forms of documentation which contains instructions for the use and maintenance of weapons, weapon system, components and equipment.

Technical Manual

Safety/HAZMAT

100

Purpose: to establish an effective, aggressive, and continuous accident prevention program.

Naval Aviation Safety Program

200

.... will require that persons are instructed and drilled in all safety precautions and procedure, which they are complied with, and that applicable safety precautions are posted.

The Commanding Officer

300

The establishment of a low impedance path between two metal surfaces.

Bonding

400

Have a flash point below 100F and give a vapor pressure not exceeding 40psig at 100F

Flammable Liquids

500

Designed to provide workers and emergency personnel with information for handling or working with a particular substance.

Safety Data Sheet

Common Hand Tools & TCP

100

Tool that is used where there is not sufficient vertical clearance.

Offset screwdriver

200

Tool used where the space for handle swing is limited

Box end wrench

300

An alternative tool for twisting safety wire and used for confined areas where fingers cannot be used.

Duckbill Pliers

400

.... is responsible for implementing and promoting the Tool Control Program.

Maintenance/Material Control Officer

500

State the 5 steps for reporting a Missing Tool Report.

1. Notify Maintenance Control and W/C Supervisor

2. Conduct a thorough search 

3. If tool is not found, initiate Missing Tool Report

4. Maintenance Control notifies MO and QA

5. A/C will be in "down" status, MO initiates investigation conducted by QA

Structural Hardware

100

The Structural Hardware Manual

NA 01-1A-8

200

To assemble structural parts.

Structural Bolts

300

To provide a means of loading a bolted assembly to a desired level

Aircraft Nuts

400

All screws and bolts shall at least have ........ protruding through the nut when installed.

two complete threads

500

Fastens panels to high stress areas of the aircraft to allow for quick and easy access to the interior of the aircraft.

Camloc high-stress fasteners

Precision Intruments, Safetying, Torquing

100

Cotter pins are used with which type of nut?

Castlellated nuts

200

A scale that has horizontal index line with a value of twenty-five thousandth (0.025) of an inch per vertical line. 

Sleeve Scale

300

Length of torque wrench from the center of the drive to the center of the handle grip.

Perpendicular distance

400

The most positive and satisfactory method of securing bolts, nuts, turnbuckles, etc. 

Lockwire/Safety Wire

500

State the difference between the two styles of wiring

Double twist: Used on all types of hardware when strength is required to keep the item secured.

Single Wire: Used on small, closely spaced items and on items that are in hard-to-reach areas