review 1
review 2
review 3
Trade terms 1
Trade terms 2
100

A condition in which body temperature drops a few degrees below normal is known as 

cold stress

100

The term PEL refers to a workers (    ).

maximum exposure limit

100

The purpose of a double-insulating an electrically powered tool is to(           ).

protect users from electrical shock

100

An unplanned event that results in personal injury or property damage

Accident

100

The joining of metal parts by fusion, in which  the necessary heat is produced by means of an electric arc

Arc Welding

200

Work that is performed near a hazard but not in direct contact with it is called 

proximity work

200

Swollen eyes and sandy feeling in the eyes are symptoms of 

a flash burn

200

Course-grained, granular: sand, gravel, and loamy sand. Particles are visible to the naked eye.

Type C Soil

200

A Work area large enough for a person to work in, but with limited means of entry and exit and not designated for continuous occupancy 

Confined space

200

The damage that can be done to eyes after even brief exposure to ultraviolet light from arc welding

Flash Burn

300

P.A.S.S. method stands for 

Pull

Aim

Squeeze

Sweep

300

Class (  ) fire extinguisher is used for liquids.

B

300

For an extension ladder up to 36 feet long, the overlap must be (   ) feet

Three 

300

Any man-made cut, cavity, trench, or depression in an earth surface, formed by removing earth

Excavation

300

The temperature at which fuel gives off enough vapors to burn.

Flash point

400

Class (   ) Fire extinguisher is used for electrical equipment

C

400

Fire triangle contains, Fuel, Heat and (         )

Oxygen

400

A (             ) tag means the scaffold does not meet all OSHA standards, Safety Harness must be worn.

Yellow

400

The conducting connection between electrical equipment or an electrical circuit and the earth

Ground

400

The organization of a company's management, including reporting procedures, supervisory responsibility, and administration

Management System

500

Personnel working in the vicinity of arc welding work must wear eye protection with tinted lenses.

True

500

Using a (      ) is most likely to produce a flying object 

chipping hammer

500

What are the Fatal Four

struck-by-object

electrocution

caught-in

caught between

500

An unplanned event that does not result in personal injury but may result in property damage or is worthy of recording

Incident

500

An agency of the US Department of Labor that regulates workplace safety

OSHA