Drawings
The elevation or height of an object, as well as the front, rear or sides of the structure to show entire unit or area
elevation and section drawings
General area of where piping goes
What does an iso indicate
The outside perimeter of a project
A three dimensional drawing of a piping system that is not drawn to scale in order to provide clarity
ISO
A plan that shows the location of a structure on. piece of property and usually indicates where the water and sewer mains are installed. It includes info on sections of the land where nothing can be made
Plot plan
Significant changes were made in the construction process
As built drawing
Make pieces manageable but put together in the right relationship to make it easy to fit
spool drawing
The standard point of reference against which things may be compared or assesed, this term also refers to a surveyors mark cut in a will, pillar , or building that is used as a reference point in measuring elevation and distance
What is benchmark
A group of abbreviations that specify size, service, material class/specification, insulation size, and tracinf requirement or given piping segment
Line number
The area of a drawing used to record all revisions, usually located in lower center of drawings
Revision block
Locations of all equipment used in the system and how it is arranged
equipment arrangement
Shows schematic version of a drawing of a total system
P&ID
A drawing with detailed plans of a part or system
What is blueprint
A drawing that contains one or more separate views to show the shape of the object from the different perspective so that an active drawing can be produced
Orthographic drawing
A representation of a section of piping that is to be fabricated before erection, spool drawings are usually drawn for each line in the system
spool drawing
The placement of each type of hanger and support in the system
Pipe support drawings and detail sheets
To show multiple views in a single view
Iso
THe recess on the inside of a wall, used for piping or electrical lines
Chase
The projection of a single view of a project
Orthographic projection
A piping segment of a pipe system or iso
spool
The fabrication, erection, and setting drawings that are necessary to install a piece of equipment used by pipe fitters to install equipment and ensure all necessary pre-piping is in its required location
Equipment drawings
To show exact shape from a different direction
A drawing, at a larger scale of part of another drawing, drawings and detail sheets provide the information needed to build or intall part of a system or the entire system
Detail sheet
A scientific flow diagram of the complete system or systems that shows the function, instrument, valving, and equipment sequence
P&ID
A block on drawing which contains info used to identify the project or any part of the project. It is usually designed by the engineering division and uses coding systems that designates all drawings used on the project
Title block