Building Materials Fasteners and Adhesives
What poses safety hazard while working with steel framing members _____.
Sharp edges
Before attempting to lift any material _____.
look for any protruding nails, wires, or sharp edges
The knot shown in the figure above is a _____.
To work with motorized material- handling equipment, a worker must be _____.
trained, certified and authorized
How are anchor bolts used in wood frame construction _____.
To attach sill plate to foundation
Before attempting to lower an overhead load, _____
One common way to tie a clove hitch is to use two _____.
half hitches
How is the fall zone for a forklift operation best defined?
any area into which the lifted materials could potentially fall.
What is the nominal size of a piece of lumber_____.
Size by which it is known and sold
What is the proper procedures to lift objects?
When moving a material cart on an inclined or declined surface, be sure the _____.
load does not exceed the labeled weight capacity
To prevent a tipover when driving a rough terrain forklift, keep the load _____.
low
When stacking bags of material that are the same width, step back and cross key the bags _____.
every 10 bags high
To transport a bottle of compressed gas, use a _____.
cylinder cart
When using hand signals, always _____.
maintain eye contact with the operator
Never stack or store materials _____.
on scaffolds
What device may have a rotating table surface and /or spike on the table surface for a better grip?
The forklift hand signal for dog everything means
to pause