Safety 1
Which of the following is a segment of manufacturing?
a)Food and beverage
b)Industrial
c)Process
d)All of the above
All of the Above
The three Fs of product design are form, fit and __________.
a)Function
b)Fabrication
c)Foundation
d)Feature
Function
Edwards Deming's plan for continuous improvement is __________.
a)Plan-do-check-act (PDCA)
b)Ask-verify-plan-enact (AVPE)
c)Plan-perform-review-document(PPRD)
d)Design-create-implement-review(DCIR)
Plan-do-check-act (PDCA)
Zero defects and breakdowns is a goal of __________.
a)TPM
b)FDA
c)UAW
d)WPA
TPM (Total Productive Maintenance)
Perhaps the best place to store preventive maintenance records is __________.
a)In a safe and secure location
b)In the supervisor's office
c)In the maintenance office
d)A plastic folder attached to theequipment
In a safe and secure location
What is the process of converting raw materials into finished goods.
a)Numerical control
b)Transportation
c)Manufacturing
d)Consumption
Manufacturing
The QA department ensures that the products meet requirements as defined by whom?
a)Sales and marketing
b)Research and development
c)Competitors
d)The Customers
The Customer
The mission of OSHA, or the __________, is to ensure safe and healthfulworking conditions for working men and women.
a)Office of Standards and HealthAgency
b)Occupational Safety and HealthAdministration
c)Occupational Security and HearingAssociation
d)Office of Statutes and HeritageAcquisitions
Occupational Safety and HealthAdministration
A maintenance log records work performed on a piece of equipment. Amaintenance log should be kept for __________.
a)Machines without safety guards
b)Two weeks following a machinefailure
c)Machines that show signs of wear
d)Every machine
Every machine
What is an example of failure to follow preventive maintenance?
a)Lubricating bearings as prescribed
b)Skipping a scheduled cleaning
c)Replacing V-belts in sets
d)Filter replacement
Skipping a scheduled cleaning
A system that combines advanced technologies to make customized productsfor less money and high quality is called __________ manufacturing
a)New
b)Advanced
c)Traditional
d)Modern
Advanced
Nanotechnologies, artificial intelligence, and robots are examples of what kindof technology?
a)Industry 4.0
b)The third industrial revolution
c)5G communication
d)None of the above
Industry 4.0
Bearing seals can be damaged by what?
a)Routine lubrication processes
b)Excessive lubrication
c)Shortening the run time
d)Proper burn-in
Excessive lubrication
Daily preventive maintenance procedures, such as machine lubrication, are__________.
a)Planned maintenance activities
b)Unscheduled events and the workershould put in overtime to prevent adrop in production rates
c)Not really necessary and can beskipped several days in a row
d)Require a maintenance team toperform
Planned maintenance activities
What is most closely associated with repair of broken parts?
a)Preventive maintenance
b)Predictive maintenance
c)Breakdown maintenance
d)PDCA cycles
Breakdown maintenance
A consensus is a decision-making process whereby the team members allaccept the same decision __________.
a)Because it is their last choice
b)When no other choices can be found
c)Because it is the choice of their teamleader
d)Even though it may not be theirfirst choice
Even though it may not be theirfirst choice
Which of the following items marked the advent of the third industrialrevolution?
a)Steam-powered machines
b)Mass production
c)Computers
d)Networking
Computers
EPA regulations are designed to protect you from which of the followinghazards?
a)Airborne and waterbornecontaminants
b)Slips, trips, and falls
c)Fires
d)Mechanical hazards
Airborne and waterbornecontaminants
Equipment should be inspected and reported to whom at the start of theproduction day?
a)The incoming shift
b)The auditor
c)All personnel
d)Appropriate parties
Appropriate parties
What should a technician do before performing preventive maintenance?
a)Acquire tools and supplies, then shut down the machine
b)Interview the operator
c)Review the user manual
d)Make sure that the machine parts arestill available
Acquire tools and supplies, then shut down the machine
The person who performs a step in a production process is the internalcustomer to the person who performs __________.
a)The next step in the process
b)The previous step in the process
c)The same operation in the process
d)The final operation in the process
The previous step in the process
Which of the following is an IIoT application?
a)Controlling your house thermostatwith your phone
b)Using your phone to see what is inyour refrigerator
c)Viewing who is at your door from aremote location
d)Monitoring in-plant processes
Monitoring in-plant processes
What is preventive maintenance defined as?
a)Condition-based servicing
b)Run-to-breakdown production
c)Plan-Do-Check-Act (PDCA) cycles
d)Routine servicing atpredetermined intervals
Routine servicing atpredetermined intervals
How often the maintenance will occur is the primary consideration of whattype of maintenance?
a)Predictive
b)Reactive
c)Responsive
d)Preventive
Preventive
When a cutting tool provides unacceptable product quality results, it should bereplaced and __________.
a)Resharpened
b)Scrapped
c)Reused later
d)Repurposed
Repurposed