A
When stripping wires do you use the top or bottom set of numbers on the strippers?
Top
High and low voltage cable or wire can be bundled together. True or False?
False
The integrity dot indentions on the Greenlee Crimper should be facing up or down when holding the crimper correctly?
Up
Can you use zip ties on ethernet or fiber optic cables?
No. Use Velcro to loosely hold them together.
What does AWG stand for?
American Wire Guage
If wires are unmarked on the drawings, what should you do?
Look at the "5KV Wire List" in the top right corner, find "unmarked" and this indicates what wire size is used for unmarked wires on the drawing.
What should be done after attaching a wire to a terminal block?
Perform a pull test.
How big should service loops be?
Three finger service loop
Can you use zip ties inside of a wire channel?
No. Wire ties are not used inside of wire channels except for special occasions.
What is the max amount of wires that can be inserted per connection to a device?
2
What does "KX" mean on the BOM?
Kanban- a part that is stocked in the building
Free Space!!!!!
Free points!!!
Name one type of strip and poke terminal block.
TBat3, Male or Female, XBut6, XBut4D22
When wires are routed to a mounted component or terminal block, wire ties should be placed on the bundle every ___ leads.
4-6
When connecting a wire to a Ground bar what is the wire limit per connection?
3
Where would you find the shipping split information?
on the Front View drawing
What color terminal would you use for a 14 gauge wire?
Blue terminal
What is the purpose of service loops?
to provide adequate length to allow two re-terminations, to allow connection of 1 up and 1 down on the TB.
Red terminals are used for what size wire gauges?
18-22 AWG
All CTs require what kind of terminals?
a) Fork
b) Ring
c) Disconnect
d) Blade
b) Ring
What is one piece of information you would find on the unit schedule?
The unit schedule is broken down into sections and units and provides device information (such as device type, contactor & breaker info), Protection information (such as FLA and CT ratio), fuse information (such as fuse size), and terminations information (such as control type, and lug information).
What is the difference between Yellow-6 ring terminal and Yellow-10 ring terminal?
The ring hole will be bigger on the Yellow-10.
Where would you find the FLA number?
The FLA number is found on the Unit Schedule under the Protection Info category under Full Load Amps, Locked Rotator Amps (See Notes).
When using the Greenlee wire strippers to strip shielded cables, you should strip __ - __ inches away from the end.
1-2 inches.
What is the name of the terminal block with staggerd blocks?
TBal30